Darbo

Jase was right about everything except there was no roller start/stop option, I changed minimum rpm instead and tested it for a bit and it seemed good, have to wait for the customer to give it a proper work out but yeah, think we're all good.

You've been a big help regardless, thankyou.

Thanks jase, am I on the right track doing this? It keeps going into override after a few minutes of use so I'm attempting to lower the rpm value it trips out at.

Thanks lads, I'll try both on Monday, Jase I think that's the only thing I didn't do, hold it in with ignition off, good call. Thanks again.

A tunnissen chipper recently turned up at work for repair, I think it's a 190 after doing a bit of research, however we have no manuals and Google isn't helping much. The problem is it keeps going into override, I've looked through this forum and one guy was talking about adjusting it's rpm but from what he described the controls are a little different on this one, I have a down arrow, a set button and an up arrow, no amount of holding down or any combination will allow me to change any values, all I can do is change what info is displayed, has anyone any experience with this? I'm at my wits end worth the flipping thing, any help would be great.