Jump to content

Log in or register to remove this advert

Harry_L

Member
  • Posts

    294
  • Joined

  • Last visited

Everything posted by Harry_L

  1. Are they good enough? Sent from my iPhone using Arbtalk
  2. Mystery leaf growing off of trunk Sent from my iPhone using Arbtalk
  3. Growth at base of tree ( dog wood sprouts, and other leaf) Sent from my iPhone using Arbtalk
  4. I recently did work experience and the guy gave me this saw, he said it had only ever been used 10 or so times. On the carb the H screw has a yellow cap on it which i think is a limiter but the idle screw and the L screw have no signs of limiters Sent from my iPhone using Arbtalk
  5. Any idea what it is sloth? Sent from my iPhone using Arbtalk
  6. Ok well thanks for your help Sent from my iPhone using Arbtalk
  7. Don't know if this matters but at the base of the tree there is two types of saplings, one is dogwood and the other is this mysterious leaf thingy Sent from my iPhone using Arbtalk
  8. I am 100% sure it comes from the same tree, and no it is just growing from the main stem about chest height Sent from my iPhone using Arbtalk
  9. You can see the dog wood leaf on the top and the service tree leaf on the bottom. Sent from my iPhone using Arbtalk
  10. I have what i think is a dog wood tree in my front garden, but recently i noticed there was another branch growing iff of it with completely different leaves, the new branch looks like a service tree. Can anyone help answer why this has happened please. Cheers, Harry Sent from my iPhone using Arbtalk
  11. I couldn't see a spring on it, but it still screwed in, is that ok? Sent from my iPhone using Arbtalk
  12. Haha, so i need a new carb then? Sent from my iPhone using Arbtalk
  13. Haha wish i could do that peat, The carb says Stihl and Zama on it Sent from my iPhone using Arbtalk
  14. I just tested, there is a spark and there is compression. I adjusted the H screw like you said but when i went to adjust the L screw i couldn't find it so i took the carb off to adjust it, then when i pulled the carb off the L screw just fell onto the floor, so i put it back in and twisted it one turn. So i have two questions, is the L screw meant to fall out? And is there any other problems that could stop the saw from starting? Thanks very much -Harry Sent from my iPhone using Arbtalk
  15. Ok thanks . Sent from my iPhone using Arbtalk
  16. Just out of curiosity what does it mean if the plug is wet?? Sent from my iPhone using Arbtalk
  17. Thanks very much guys will try this tomorrow!! Sent from my iPhone using Arbtalk
  18. I have for the H and the idle speed but there are no markings next to the l screw! Sent from my iPhone using Arbtalk
  19. Hi all, My Stihl ms 230 wont start at all. The other day it would start then cut out so i adjusted the carb accordingly, i went to test it today to check it worked and too my surprise it wont start. Help! Many thanks, Harry Sent from my iPhone using Arbtalk
  20. Harry_L

    Markings?

    Thank you very much! Sent from my iPhone using Arbtalk
  21. Harry_L

    Markings?

    Hi all, I was wondering what the two bottom markings meant? I know the top one is off, the I one is semi choke, and one of the bottom ones is full choke. But why is there 2 for full choke?? Many thanks Sent from my iPhone using Arbtalk
  22. Cheers kevm i think that is an easier option Sent from my iPhone using Arbtalk
  23. Ok will try cheers Sent from my iPhone using Arbtalk
  24. I have tried the O ring but that didn't work guess I'll buy a new one unless anyone has any other suggestions? Sent from my iPhone using Arbtalk
  25. Haha he sure is, cheers Spud i shall try that. Sent from my iPhone using Arbtalk

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.