KoddTim
-
Posts
13 -
Joined
-
Last visited
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by KoddTim
-
ITS WORKING! Horraah! Thanks Gardenkit!! When I got home from work today I studied how the clutch cable worked and realised it needed slackening off, so after a few tweaks I tried it and got it working. Thanks again
-
Ok... I've now just got back in the from the garage after taking it all apart again and putting the sprockets on the other way round. The clutch cable seems a bit tight when then clutch lever is in its standard position though. How do I slacken it off? If I ever seen a mower in bits again it will be too soon!
-
Cheers gardenkit I appreciate your help... I've just fitted a new clutch cable, although the feel of the clutch lever now feels better there is still no drive. I've left the blade and plastic cover off the bottom of the mower and had a look underneath whilst it's running. All the belts and the gearbox seem to be rotating as they should. The only thing not replaced now is the two belts... When I pull the mower backwards it will freewheel, when I try and push it forwards it is locked. From that description do you think the sprockets are on the right way?
-
The rollers spin very slowly when I lift it up but not enough to propel it. How do I check if the belts are correctly tensioned?
-
I swear this mower is going to end up like triggers broom! I acquired a Hayter Harrier 56 pro and I have fully serviced the roller with new bearings and sprockets, replaced the gearbox (!) and still it doesn't drive. The only thing I have not replaced that I can imagine it is, is the clutch cable? In the manual it suggested that the tension on the spring at the gearbox end is 13mm, what I am not sure of if this is when the clutch lever is at 60mm or whether it is in a static position...? The spring on my cable when in a standard position is nearly 1 inch... Before throwing the towel in and taking it to the dealer do you think I should buy a new clutch cable? The owners guide isn't particularly easy to follow about adjusting the cable so I don't want to buy a new one and face the same issue. Any help greatfully appreciated T
-
So... After doing all this and being happy with the play on the roller I rotated the engine at the end where the blade fastens to and noticed that it isn't turning the rollers around... Could the gearbox possibly have gone as well? Is there a way to check? Apparently it needed pushing before I bought it...
-
There were no black nylon bushes between the freewheels, just one steel ring... I'be bought some shims that will fit so will see how it goes. Thanks for your help
-
Should be ok now!
-
Here is the video
-
Thanks Gardenkit! I've studied the top hat bushes and they seem fine from the outside but I am wondering if the inside face of the top hat bush has worn so much that it is causing the play? I actually reassembled the whole lot with new roller shaft support bearings, noticed the play so decided to strip it down again. In the process I couldn't get one of the bearings off again with my puller and thus broke the bearing case as I had to put so much torque into the puller...!
-
thanks, anyone know if there is a non-weld way?
-
Hi, thanks for the reply I'm thinking if I welded two rollers together though the two rollers now together as one would then have play though and the whole roller would slide sideways? Many thanks
-
Hi folks, sorry to bring up an old post! I have just taken apart my new second hand hayter harrier 56 pro (thanks to this excellent forum) to service the roller (I have never done anything like this before on mowers but restore cars so am quite practical). I've installed new bearings on the end of the roller and new sprockets but upon reassembly I have noticed ALOT of sideways play where the rollers are sliding on the shaft... Can anyone advise if I should/can shim up the gap or is there something else wrong with it? I have filmed the problem below Many thanks [ame] [/ame]
