Topogwen

Unimog U400 £36900 plus vat. Ducker HF250 £16000 plus vat.

2008 reg Land Rover 130 Defender 2.4TDCi, 6-SPEED Solid chassis in need of a treatment. Ramsey winch fitted to the front with a wander lead and isolation switch in cab. Rear steps and tow pack. Ideal camper conversion or flat bed/tipper. Being a 130 it came from the manufacture as a purpose built 3500kg GVW (unlike many 110's that have to have extra strengthening and replacement of springs etc) with longest bed length available for a Defender it is also able to tow 3500kg giving it a MAM/GTW 7000kg. There is a Quadtech workshop body available for additional cost, with roof ladder rack storage, fitted with pipe carrier and flashing beacons. Side mounted roller shutter doors for shelving and storage. A drying room. Doors open at rear to large storage space with shelf and pull out drawer. Spare keys included for all doors and ignition. Usual signs of wear for its age. Features radio/cd player, cubby box with cup holders and rear sliding window. This vehicle is ready for a test drive and once funds are cleared can be collected. £18000 plus vat @ 20%, invoice supplied on completion of sale.

This chipper had the main bearing replaced a few years ago (please see last photos) and has done little work since. The no stress control would require a reconnection. Apart from a paint job the chipper is solid and chips up to 10” diameter. Collins 10 ton tipping trailer with extended drawbar (for this chipper set up) available in my other listing. Tractor not for sale. The PC Woodchipper The PC Woodchipper is a powerful 3-point hitch-mounted woodchipper for tractors with 80-150 hp. It is powered by the tractor’s PTO through a power-transition axle, while the woodchipping machiery is driven by the tractor’s internal hydraulics. The PC Woodchipper is available in a srandard model with a continuous discharge chute which can be rotated 360 degrees and locked for discharge disrection. When setting the feed plate, the discharge distance can be adjusted. The woodchipper can chip branches and wood to a diameter of up to 22 cm, depending on the nature of the wood. The infeed chute’s opening is so big that it is normally unnecessary to trim the wood before treatment. The infeed rollers are horizontal, providing the strongest construction and best secuurement of the wood. The woodchipper is available in a standard model with 1 overlying infeed roller specially constructed; an extra underlying roller can easily be added for further securement of the wood. The inertia force in the powerful rotor ensures smooth running with least possible shock load. The PC Woodchipper is easy to service and maintain and can be disassembled without using special tools. The use of woodchips can be expected to increase heat output in relation to ordinary firewood by 20%. Similarly, 1,000 litres of fuel oil for heating can be replaced by 14 m3 of woodchips. At current oil prices a change to woodchips may well be advantageous. In addition to heating, woodchips can also be used for soil improvement or composting. The PC Woodchipper is CE-marked and meets the requirements for machine protection of the Environmental Law. Chipping disc diameter: 942mm Capacity: 5-30 m3 ph Chipping disc thickness: c:47mm Motor: 540/1000 rpm max Number of knives: 4 Power requirement: 80-150hp Infeed opening: 270x270mm Hydraulics: Tractor-driven Axle diameter: 70mm Weight: c1,100 kg

The tipping gear works though a seal could be replaced on a ram. The tow bar has been extended in the past by a farm agricultural engineer (CJ Cox Bagber) to allow for a wood chipper to be carried at the same time (please see my other listing PC Stal). The trailer would benefit from an overhaul as multiple points require welding or it could be treated to a whole new bed from such as the skip factory Hurn, Bournemouth, tyres are very worn and the hydraulic piping is frayed. Other than that the sub frame is in good order. There is also a tail gate available at additional cost, should someone wish to take the silage sides off. Tractor not included in sale.

4.7m Country timber crane with hydraulic extension and rotating grab. 3000kg capacity timber trailer, rocking beam axles, headboard, forestry/agricultural ring hitch, with adjustable bolsters and hydraulic support legs (1 ram is slightly bent but it doesn’t effect the performance). Hydraulic controls (rubber has perished around base of joy sticks but doesn’t effect performance) run off a hydraulic pack or agricultural/forestry or landscaping machine hydraulic spool valves. Overall length 4500mm Length of bed 3000mm Tow bar 1500mm Width 1500mm Unladen weight 674kg £8640 including vat @ 20%. Invoice will be supplied on completion of sale. New these machines start at £13400 including vat @ 20%. Timber and green machine not included in sale.

Authentic rusty red. Hydraulic ramps. Air brakes or hydraulic brake supplies. Bed has been reinforced with steel. All six brake actuators have been replaced. £12240 including vat @ 20%. Invoice supplied on completion of sale.

21m reach rotating telehandler able to lift maximum 4500kg. Year 2001. Hours 16681 but anyone who knows these machines will understand a lot of those are on tick over. GMT 035 grapple saw with manual telescopic crane jib/boom direct from Gierkink Machine and rated to 4500kg lift point. Year 2014. Set of almost new tyres on road/off road style. Includes pallet forks. Storage container and other machines or items in photos are not include in sale. £78000 including vat @ 20%. I also have a JPM 27000kg tri axle low loader trailer, with air or hydraulic brakes available (please see other advert) that is suitable for towing this to site. Or you can drive it on the road as has been registered through DVLA.