Ukulian

I don't visit this page often, so apologies for the late reply. :(

I use the 501sx for my main blocking saw, with a 20" quarter tip running 3/8" lo-pro. I occasionally use it with a 16" dime tip and 1/4" 0.050 chain. The sprocket is a doddle to change. Only ever had one 1/4" chain snap, and it was past it's best, so no real worries there, but with the larger tip the 3/8" lo-pro does cut faster on the 20" bar. Probably clears the swarf easier. :) 

Hope it helps.

Ian Andrews

Congrats Steve. Enjoy the wine. Well deserved.

We don't pay for the material collected as we cover the cost of transport and processing.

Then what is the £500+ per load your office is quoting to take chip/brash/logs from our yard? And that's if we load??

I'd take the extra time to do the ferry rather than the chunnel if you decide on that route. The longer break from driving, and the experience of the sea crossing for the youngsters is well worth the extra hour or so.

Make sure you go through the Alps, as they are stunning at that time of year. And plan on shorter trips every other day or so. Enjoy

Looking good at first glance Steve

I'll take a look through it if you would like. Got PC, tablet and phone

360wes on a 14" .043 bar and stihl chain here. Carving bar that is. Excellent for detail and light shaping. Like all echos it needs some running in. If it's just for detailing, the 281wes is even cheaper and lighter in weight. Both will need a quarter sprocket fitting, but well worth it.

Nice one Ian

Go with the 25ap chain from Oregon rather than the 25ff. Far more versatile and a LOT easier to sharpen. And enjoy the experience.

I use Cyberlink's director zone. Works for me

Well kitted out, No wonder you might sleep in them!

My son is a openreach fibre optic specialist in repairs and sent all over the country, his van has microwave, kettle, toaster, portable loo, bed and portable wash facilities. And he loves his job.

Mine has double bed/settee, loo, kettle, running water, TV, 12v coolbox and LED lights. That's all in the front end. Keeps me comfortable :thumbup1:

Chainsaw Carving

Lovely van ... but can you imagine if it broke down and couldn't be recovered until the next day ... Nightmare think I would end up sleeping in it

That's what I do in mine when it's on the road!

Not my cup of tea. You have to bend down to get in it!

Public liability and your own risk assessment are a must. From there, Mark is pretty much on the ball. You need a pitch at least 10m x 10m and we use orange plastic snow fencing held by road pins to mark it out. We've had the public just walk under rope!

Make sure the organisers are supplying logs, if not take your own. That means vehicle + trailer or large vehicle, which, once emptied of stock / logs doubles up as sleeping accommodation. We carry a cool box, camping cooker, water, etc to cover the food/drink side, otherwise you can pay a fortune for drinks.

Add in a rake/shovel/blower and bags for cleaning up afterwards and be prepared to take it away with you unless the organisers are really organised!

Check if there is electricity on site, if not, take a generator or battery gear and plenty of batteries. (If you use power tools for finishing)

Take someone with you. Shows with multiple carvers are not a problem, but if it's a show where you are the only carver, you don't want to be legging it across a field to the nearest loo and leaving all that expensive gear unattended!!

Enjoy the event and be prepared to answer some very silly questions! ;)

Calling all Certified Groundsmen & Tree Surgeons - We are looking to recruit 3 reliable team-players to join our busy crew.

You must have your tickets! Minimum requirements: CS30/31 Ground Crew & CS38/39 for climbers.

Driving licence an advantage.

Interested? CV to [email protected]

Yep, last night, two hours after a full PC scan

Wouldn't carve it once cut, but never tried when it's still in the ground. Splits in a star pattern from the inside.

Another vote here for the little Citroens

Here is an option

Le Criquet

No idea what they're like though

Impacto do some excellent AV gloves, which will do your hands more good than any cut protection!

I do a lot of joints with a 16" Sugihara carving bar. It a 'dime' tip but one of those that RobD had which had a slightly larger than 'dime' nose. Not as big as a quarter, but not tiny.

It works excellent for this kind of thing but it is tapered along it's length, so you have to make sure the cuts are parallel top and bottom. Being a 'dime' tip you have to run 1/4" chain but this leaves a cleaner cut, so no real downside.

Another advantage I can see is that, if you have marked the mortice, it's a lot easier to see the lines without that contraption in the way. Depth I control by only plunging as far as a certain letter on the bar. At 2 years old and used daily, the lettering is still visible

It is much easier and safer to plunge cut with a carving bar. :)

We have a stream of newly qualified climbers who all lack the one essential thing that we would require. That is a driving and towing licence! If you don't have them, spend some of your money getting them.

For us, you're not employable as a climber if you can't get the crew/chipper to site!

An Echo 390 is less than 400 quid at Forest and Arb

and it's a superb saw :thumbup: