Jump to content

Log in or register to remove this advert

talismanfisher

Member
  • Posts

    23
  • Joined

  • Last visited

Posts posted by talismanfisher

  1. Hi folks, my 2006 a530t feed rollers slowed right down randomly? Had been fine and no stress was working. I've turned roller speed dial on hopper up to 8 but didn't help so had to wind the brass nob on outside of hopper micro switch (one pointed at in pic) right in to get them going again....any ideas? ImageUploadedByArbtalk1437319654.915650.jpg.e18fd6a3eb3c33e88eeae17d636224a1.jpg

  2. But are they all reintroduced????????

    A animal recovered through a live capture exercise last year wasn't a DNA match to any of the reintroductions or "captive" populations...........crazy to think it could have just swam here tho eh?

  3. I remember an old boy who had issues with lower legs/ankles (don't know what tho) so he looped the strap of a long felling lever over his left wrist and used the saw as his other stick to get to the tree, placed left shoulder against tree to do gob cut then down on one knee for the back cut, then away on the lever n saw! Anything is possible! Good luck and good on ya!

  4. Cool, I'll check all those bits this week and see how we get on! Having changed the disc blades for a nice new set it's not really blinked at anything I've put through since! I'm happy with spanners and welders....it's electrics that get me!

     

    Many thanks for all the help, I'll let you know how I get on!

  5. It is a lister engine by the way, the serial number of the no stress unit is 0701015

    Machine is model EC150/25 D

     

    Whilst I've got your attention........the gap between the cutting face of the disc and the shear bars is around 6mm. To much? Shear bar is quite worn and I'm guessing it could be replaced to help further?

  6. Hi, many thanks. I've had a look today and no sign of any sensor or wires from the alloy casing that's at the pump end, there is a small threaded hole that looks ideal for a sensor tho..............

     

    Lights wise it starts with flashing red then sold red changing to green once revs are up?

    I've just fitted new disc blades which seems to have helped though I've not fed in anything that'd require the no stress to activate.

  7. As with all things in local authority it's always the "what if" "who's to blame" issue!

    If HCC were to knowingly allow any activity to be undertaken in its land without due consideration and something bad happens then there is a risk of contributory negligence being brought up!

    I'd like to say that Talismanfisher is my real name but sadly I am Dave! Drop me an email and we'll start thinking of what may be achieved.

  8. Hi all, I'm senior ranger for manor farm and royal vic so will ask the bosses for there thoughts on the idea, no doubt insurance/liability will come into it. As would the need to identify areas or individual trees that are not sensitive in any way i.e bats etc.....but if you could all dead wood above the paths etc I'd be most happy!

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.