1_badger

<p>Hi mate, the 510 case is close but no good, the cut off saw doesn't have the chain oiler facility.</p>

<p> </p>

<p>I don't think you will find it will be an issue with the crankcases to be honest, ive never had, seen or heard any issues with them.</p>

<p> The fuel tank is totally separate from the crankcases and is in the pull start unit. 051's will fit but are slightly smaller but direct replacement.</p>

<p> </p>

<p>So by your message you have spark if its spluttered. They are prone to flooding so make sure you have a dry plug in it. The way I start them after they haven't been started for a while is no choke, lock the throttle pin on part throttle, pour a small amount of fuel in the top of the carb (about a tablespoon) and pull it over and they tend to fire in the first 2 or 3 pulls.</p>

<p> </p>

<p>Where do you live? I assume your not local to me? </p>

<p>You say spark chip? Im assuming you mean you have replaced the trigger unit with a module?</p>

<p>Hi, </p>

<p>I wanted to ask for your advice as you appeared pretty knowledgeable about Stihl 075's. I've got an old 075AV that was bought not running. I've done a clean up and fitted a new carb kit, replacement spark chip and tank and got the saw to cough but not start. I'm nervous that its got a fuel leak which I can't trace yet, but worry that the case may be cracked. I've looked at replacement cases and there's some Cut off saw cases for a TS510 etc on ebay at good prices. My 075 manual states the crankcase PN is 1111 020 2116. The case I've seen advertised is 1111 020 2100. Do you know if there are any compatible alternatives to the 1111 020 2116? i.e. is this cut off saw case compatible.</p>

<p> </p>

<p>Any advice would be very welcome.</p>