woodyjjw

Early chip body on my 130, lid lifts up and the wings are hinged so fold up to hold open the top, all from old reclaimed road signs.

 

sent while pretending to do something important on my mobile.

I like that idea thanks for posting!

Thanks for the reply's guys, like the idea of the landy chip catcher, looks like you will be able to fill it right up.

Hi Everyone

Recently put decent alloy sides on the truck, isuzu nkr. Looking to make a chip catcher at the front, just wondering what designs people did? Any pics would be amazing!

Thanks in advance!

Really like this answer, Ha,Ha. You make it sound so easy, commercial work isn't that easy to get where I live, loosing the odd customer, well I think its more than the odd customer from the research I have been doing. In this industry a large part of turnover is wages and the subbys I use ain't vat reg. Its typical of this country to penalise the hard working honest man and spoon feed the scum. It really does not give encouragement to be honest.

Very hard where I am as I am on an island. Lost a fair amount of work from being VAT registered this year. But still got enough work on. The plus side is I have been looked at more seriously now as a bigger company!!

Hi

Just wondering if you could tell me what Bearings/bushes there are meant to be on the timber wolf 190 2004 non turbo. I am guessing two smaller sized bearings on the opposite side to the motor, and one large bearing on the bottom roller on the motor side?

Just about to take it all apart and would like to order parts in

Thankyou

Thanks for reply,

Do you have a timberwolf dealer on the Isle Of Man?

hi,

I was just reading about adjusting the blowoff valve for the feed rollers on my chipper. Is it something that can but done by my self or do you need special tools?

Thanks

Hi Just wondering if any one can help, my chipper has done about 1000 hours now and was wondering when the roller springs need changing as the rollers dont seem to be snapping the branches as well as they used to?

Thanks

Right great, i have been doing mine every few weeks, just wanted to see what you all did, thanks for the replys

Joe

Hi

I have a TB 190 just wondering how often people tend to grease the rollers? cant seem to find anything in the manuel thats says how often and how much to put in?

Any help would be great

Thanks

Thanks everyone for replies.

There is a breather in the cap on the reservoir. The tank is exactly the same size as the one i replaced? i have been lifting and lowering the deck to try push the air out, should i refill the tank when the ram is right down?

Hi,

I dont think so, when i lift the bed up, the ram wont go all the way up because there isnt enough oil, so when i fill it a little more it overflows. Thats why i assume there is air??

Thanks for your reply

Hi everyone,

I have recently replaced the hydraulic pump and reservoir on my truck tipper. When i let the tipper down the oil foams out of the air breather on the reservoir, I assume there is air in the system? does anyone know how i go about bleeding the sytem??

Any help would be great?

Thanks

Joe

ace thanks for the advice everyone

hi, i just bought a new chipper and wondered if any one had a manual for it? i just wanted to know were the grease niples are and how often the blades need shaperening.

any help would be great

thanks

ace, will give that a try, thanks for your time

can that make the pressure high and burst it tho?? or do people do that alot?

regards

joe

Its direct acting ram. maybe it is due to being over loaded. i am not really sure how much it is supposed to tip. but is does fully extend fine.

thanks for your reply, i cant see any glass window or any sign of a level? it goes up and down fine, just when i have some weight on the back it struggles to lift so it needs someone 2 push it at the same time

hi,

i wondered if any one could help me, i am not 2 sure how much oil to put in the tipper reservior, i had a look in and cant seem 2 see any oil? if any one has any maintenance tips with the tipping system that would all help, i cant seem to find anything on the intenet.

thanks for reading

regards

joe

yer he does thats a good idea thanks

right ok thanks 4 the advice anyway, i think i will try and sell it, it sounds like a nitemare to burn

hi everyone, could any one give me advice on the best way to burn wood chip please? at the moment i am tipping on a farmers field but he wants me to burn as much as the wood chip as i can, or am i just waisting my time trying?

any advice would be good

thanks

hello everyone, i am trying to figure out what pest causes the leaf to have smokey grey dots. Any advice would be helpfull

thanks