bigsuzi

Hello all, i have a hakki pilke 2x running on pto. From time to time the power in the splitting rams seem to drop and the timber doesnt get split. next thing its ok. would anybody know or expierence such a problem ??

cheers

BP

Rung M Large today. he told me the problem and got it sorted earlier on. The problem was that the pulley on the shaft that moved forward. just loosened the two grub screws and pushed the pulley back on the shaft. Problem sorted. Thats guys for the help. Iam only a newbie to processors so sorry for the trouble

the distance between the centreline of the locking pin and the end of the pto shaft is greater than the distance between centreline of the slot on machine and the gear wheel.

Therefore when sliding the pto shaft onto the m/c the shaft wont lock in place

its a 6 spline shaft. the distance behind the slot and the gear wheel is too short. it wont lock into the slot. the shaft keeps coming off

tried a shaft from local farmer. the problem is the pin wont go into the slot, i think i need a shorter coupling. is there a hakki pilke pto shaft with a shorter than normal coupling ???

cheers:confused1:

Just bought a processor. Been toying with the idea of hiring it out. Probably processor and a two man team on a daily or weekly basis. Any of u interested. Located in Mid Ulster area .

Thanks for all help and advice. went for the following boot -

MEINDL Woodwalker Pro Chainsaw Boots

problem was that i slipped on wet ground

Hello all, iam only a part time chainsaw user. 1-2 days a week. nearly had accident last weekend. saw run up the side of my shoe. So need a pair of decent steel toe cap chainsaw boots. bout £150 budget.

Cheers

he had a ms 310 with 18 inch bar and a ms390 with 20 inch bar - the ms390 was only 35 pound more. so i said why not. its a fair step up from the ms230 i was used to !!!!!!!!!!!!

just bought a ms390 - 20 inch bar. good piece of kit. need some advice. iam looking to buy a couple of spare chains - what is the difference between chains and what would be the best for cutting firewood. iam a novice as u can tell

thanks

i think thats what the dealer said on the phone.

what do u guys think of this saw. trading in a ms 230. just want something a bit bigger with a bit more grunt. Would it run a 20 inch bar? buying it just to cut my firewood

cheers

hello all again, any processors for hire here in ireland?? cheers and thanks

hello iam from between portglenone and magherafelt. u probably never heard of them right enough.

hello all, anybody know if there is anybody who hires a firewood processor or anybody that would be willing to process a load of timber in the mid-ulster area. have thought about buying a second hand one, but second hand m/cs very hard to get here in n ireland

cheers

Hello all. looking a load of firewood in lenghts. I know hardwood is hard to get so softwood would be ok. iam from the mid-ulster area. Cheers