nottstrees
-
Posts
69 -
Joined
-
Last visited
nottstrees's Achievements
Enthusiast (6/14)
-
-
-
Rare
-
-
Recent Badges
-
Hi is there any local fitters around the nottingham area that could replace rotor bearings thanks
-
VERMEER 625i Kohler 25 Command engine help
nottstrees replied to markwildthing's topic in Maintenance help
hi try universal engines 01371875331 that engine number is now replaced by ch730 hope this helps -
Hi spud just looking for a cylinder for my 480 dont want to spend alot on it just something i would use now and then tbh
-
Thanks are they all the same piston stroke
-
Hi does any one know which or if another barrel would fit a 480cd
-
Hi does anyone know where I can get my chipper blades sharpened local in nottingham thanks
-
free lance climber required on an occasional basis in the Nottingham area please pm me with your details prices etc thanks
-
<p>Thanks will try that how much do you charge for porting will have it done when things calm down a bit </p>
<p>mick</p>
-
<p>The cylinder is unlikely to be worn, if the compression is flagging a little then try fitting a Meteor piston but make sure you purchase the 42mm one if it isn't the later silverside model with the fuel primer bubble.</p>
<p> </p>
<p>Steve</p>
-
<p>hi steve thanks for the reply its not totally knackered yet but I really like the saw so I was thinking about a new pot and piston its just starting to lack a bit of power </p>
<p>regards mick</p>
-
<p>Hi Mick, from what I can see, the stroke of the older machine is 32mm and the newer one is 32.5mm, the crank parts are different part numbers as are the crankcases so my thinking is that it will not be a straight replacement and any modification will be a real gamble! I do have a scrapper old eddition 346, I don't know if the cylinder is OK as it has a bent crank but it may give you a solution if it is OK?</p>
<p> </p>
<p>Steve</p>
-
<p>hi spud I have an old ish husky 346xp could you advise me wither I could fit the later type barrel and piston the 50cc one and where's the best place to purchase one I would prefer an original one thanks mick</p>
-
Hi Thanks for reply it was the relay
-
I have a problem with the rollers not staying in on the forward green button when I let go of the green button the rollers stop turning I have changed some of the switches in the control box { old style} changed the relay still not working any ideas would be appreciated
-
Can any one tell where i can get some higher sides fitted to mytipper body on a transit in the nottigham area
