mixedangased

On 23/02/2018 at 11:58, AndyChalmers said:

I have a Japa 370 processor.  I fitted a new chain & oregon pro-light 158SLGK095 bar not long ago.  Cut about 20 m3, never sharpened chain and bar had worn badly, chain slops about and not cut straight.  Turned bar over and perfect agian.  sharpened chain & done another 15-20m3 and bars worn again.  it doesnt seem to be cutting perfectly straight so measure the angle and only out a degree or so.  I canrt see how to get it true again.  Ive never had a problem in the past tho.  Its lubing correctly just wearing the bar groove out so chain does not sit square.  if i cut on the tip its perfect.  Can anyone reccomend anything or recomend a harder wearing bar?    

My mate has just had the same on hilkie pikie. And turned out to be the drive sprocket worn 

Anyone got a compleated chainbrake assembly for a jonsered 2095 kicking about in thair spares Or maybe just the handle ?

1 hour ago, Liam Outdoors 89 said:

Hey Skyhuck

 

Yeah I hear what ya saying, I've been cutting my own firewood from our woods for the last 18months. And I actually find enjoyable. I think its more to do with that I'm happy to spend my own time on my own business. But you raise a fair point and that's why I posted in a forum fist, before I start spending money on kit!

 

Liam

Yeah but your only doing your own wait till you get loads of orders in to do ! Get tedious after a while even with a processor !

Can I still supply logs without being Woodsure approved this year or not ?anyone know ?as from what I’ve read I can’t make sense of it !also if I buy from a Woodsure reg company to sell on do I still need to be registered ???as the wood is Woodsure ? 

On 11/03/2020 at 19:34, swinny said:

Right cheers for that. So ok for this coming winters stock then after that only orders 2 cube and over or give up?

On 11/03/2020 at 19:34, swinny said:

Right cheers for that. So ok for this coming winters stock then after that only orders 2 cube and over or give up?

So does that mean you don’t have to be registered if you supply over 2m3 loads ?

Di work on 1.5 cube to the ton across all hardwood species.

This is somthing I’ve been thinking about doing for a couple of years now,can’t seem to find anyone close to me though gl6 glos prob got 50/75 ton in the yard no ready for processing,wouldbuy it in ready processed at the right price .anyone on here want some subcontract splitting pm me I have telehandler on site and bins for storage.

On 24/09/2019 at 22:29, scbk said:

I've heard there's someone round here who does tractor, firewood processor, and 2 men for 250 a day

Maybe there's extras like mileage, fuel/vat on top, I don't know.

 

 

At the other end of the scale, a local dealer is hiring out a road tow farmi, machine only, think the price was 250, so that's excluding delivery, fuel and operator.

Is that in Gloucestershire if so can I have his number please or contact details

Approx 26 cube of oversize beech for sale,

10 cube has been down 3 yrs the rest was felled 4

weeks age diameters are2 foot /6 foot

£55 ton road side no vat,

cash on collection

I can load if need be.

good artic access

pick up gl6 7as

I used to run a battery powered face shield for grinding and sanding down car bodywork that was pretty good,had filters in the top and light weight,didn’t stem up either .was a couple of hundred quid back then ,made by 3 m,you can get compressor fed ones with charcoal filters too for isosinoite paints

Ok thanks 

3 minutes ago, gdh said:

We've put a vented floor in an old trailer and push hot air through it. Basically a grain drying floor on a very small scale. 

Thanks ,

where’s the hot air from ? The kiln ?

On 14/01/2019 at 22:10, gdh said:

Apart from the boilers that burn waste sawdust etc most need sub 20% moisture to work properly. We dry our woodchip which we use for our kiln to less than 15. You just use a small percentage of what you've dried for the next lot. 

 

Biomass boilers are also much more efficient than any log burner so emissions would be much less.

How do you dry your wood chip ?

Hi anyone one here had any dealings with teodor stojanov for kiln dried logs ?

just trying to see if anyone on here has bought any from him and to see what the quality is like .

thanks in advance 

Hoggs typhoon boots are good ,comfortable. Waterproof and breathable ,about £50 online ,usually last me a year and I never polish them.wartermans country supplies .co.uk

I have a jolly in the workshop,ex machine quick and easy to use,accurate too,Ermin plant use them in thair workshops,

got mine off eBay £200;think its a jolly star model.comes with 3 different stones.

Hi rob do you still have some ? I’m interested and in bisley no stroud 

Yep time serts far Better than  helicoils,

would never buy a helicoil,if you were closer to me I have a full set from worth .

Just found a serial plate a65?

Clearing out my lock up found some old saws a husky a65 ? I think  ? Not 100% sure tho 

cleaned it up fuelled it and it runs ,

is it collectible ? And what’s it worth ?

anyone on here collect old saws ?

got an old Remington too + and old stihl,

cheers in advance

11 hours ago, Mark Bolam said:

I'm looking forward to selling black market air dried logs.

 

They will never take me alive.

Me too ?

Got a 024 and a028 for sale if hes interested 

On 20/01/2018 at 21:39, ash_smith123 said:

The “loose cubic metre” that is quoted on the imported national companies websites are completely wrong. 

We bought a couple of pallets off a few of them years ago to find out what they equates to and they are all Massively optimistic! One quoted 3.6 loose cubic metres and we got 1.6/1.7 out of it. I also emailed them all to tell them, obviously fell on deaf ears! 

Yep the small crate you are lucky to get 1.2 cube loose out of !

£100 per cube air dried,

£130 per cube kiln dried

gloucestershire

Phenus tyres online