Sourcing Bolens Super tomahawk Chipper Knife / Lund 303

[champagnecharly]

Does any body know where I can source a Knife for Bolens Super tomahawk?

 

The blade has had it. Current blade has LUND 303 stamped on it.

 

 

https://www.dropbox.com/s/q502d7ols8jg034/WP_20150227_12_33_45_Pro.jpg

 

https://www.dropbox.com/s/lpxqv0vsp69vjf6/WP_20150227_12_33_53_Pro.jpg

 

 

Sizes are aprox:

114x30x6.5

Hc 38

Hd 7mm

 

Ohh and one other thing. Should the anvil be ground clean? It's rather pitted.

Edited February 27, 2015 by champagnecharly

[champagne_charly]

Well if anybody else gets stuck. DONT use EBay USA unless you are sure fo the steel being to spec. One seller got them made using A2. and the other would neither say the type nor the provenance( i.e. Chinese or not) Finally after many phone calls and UK manufacturers suggesting the use of D2 rather than chipper steel I came across this company: leonardimfg.com very helpful and they managed to source in A8 steel. £37 all in. from the US. Could have been worse at least now I know its got some life back into it.