Jump to content

Log in or register to remove this advert

BS5837 Annex C ( stem measurement)


Bundle 2
 Share

Recommended Posts

Hey people...

 

I have a question about the new BS...! I dont mean to labour the point but I suspect I have the stem definitions a little confused...!

Whats the accepted take of measurement (F)

It reads like a multi-stemmed tree (..of tree with more than 1 stem @ 1,5m...etc ) which makes it the same measurement convention as (E). Is this the accepted interpretation can anyone tell me ? ( Annex C appears in "normative ref" in the document...! )

cheers

Edited by Bundle 2
Link to comment
Share on other sites

Log in or register to remove this advert

Don't know if this helps you Bundle 2, but this is my take on it!

 

Pic E shows a multi-stemmed tree from which each individual stem originates from ground level

 

Pic F shows a multi-stemmed tree which begins from one stem at ground level, then breaks, at 1.5m it is multi-stemmed and you do not take the measurement below basal flare as in Pic C.

 

Think they were just trying to cover all the bases and possible examples of what you may encounter in the field.... maybe? ;)

 

Hope this helps mate

Beezy

Link to comment
Share on other sites

Aye, that is my take on it....E & F represent the same thing (arrived at mathematically by the same formula) but essentially aim to weed out confusion by depicting both scenarios...Fair enough !

For some reason, I rather had a notion that the stem diameters for the various limbs measured under the convention set in F were simply added together, thus arriving at a stem diameter....

Just chick'n....!

 

cheers

Link to comment
Share on other sites

Bit annoying that this revision to the BS was meant to eliminate maths...... yeah right!

 

Here goes..... or steal your child's scientific calculator!!

 

Multi-stemmed trees (2-5 stems)

e.g.

 

180x180=32400 + 150x150=22500 + 170x170=28900

= 83800 then square root = 289.5mm using Annex D = 290mm stem dia

 

Multi-stemmed trees (more than 5 stems)

e.g

 

130+150+140+120+170+220+200 =1130 divided by 7 (total no. of stems)

= 161x161 = 25921x7 = 181447 then square root

= 426 using Annex D = 425mm stem dia

Edited by Beezy
numpty maths ;)
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.