Makita DCS34

[Garfield]

Help required Please on my chainsaw,Makita DCS34.It started losing power as though choked up so changed the air which was very clogged up.Thought it was sorted but used it today and ran okay for twenty seconds and then started dying on full revs.Knock the revs off and it ticks over fine.Any ideas please and thanks for your time.

[spudulike]

Sounds like fuel starvation so split fuel line, clogged fuel filter or blocked carb gauze strainer. It may just need a tweak on the H screw to make it a bit richer.

[Garfield]

Thanks for your reply,lots of options and hope one of them does the trick.Thanks again.

[Garfield]

Thanks again to spudulike for tips on my chain saw problem.Hooked the fuel line out of the tank,removed fuel filter and gave it a good clean and blast.Reassemble and it works a treat,so pleased.Thanks again and what a great forum this is.