You need to be logged in to see additional information and be able to contact the advertiser!
THIS ADVERT HAS EXPIRED!
21hp stump grinder to fit Bobcat E10 minidigger
21hp stump grinder to fit Bobcat E10 minidigger
0 Questions
0 Reviews
138 views
Description
This machine was built as a project. We used the multi-tip cutter wheel from a scrapped grinder and my welding friend and I fabricated the very robust adaptor frame to mount it onto my Bobcat E10 minidigger. The digger pins are 30mm diameter.
The engine is a 21hp Honda V twin, bought new from my local Honda plant dealer. The bearings that mount the cutter head were replaced, as were the bearings in the belt tensioners. The fuel tank is hinged and swings open to allow access to the battery. The long cable to the digger is for the dead man's switch on the digger.
The cutter teeth are multip-tip, which are readily available. Equally they can be sharpened with a diamond wheel on a small grinder.
The black mounting cradle the machine sits on is included, as is the wooden dolly beneath it. The cradle has adjustable legs to make it easier to fit the machine onto the digger.
The video shows me using it for the very first time. After getting used to it I can operate it a bit more smoothly than in the video.
Recommended Questions
There are no questions to display.