Skogs

Hei skog eldste ! Victory. The whole problem was in the electricity, the fault was the sensor of the stop system, which had not completely burned out but was working with an electrical leak. Thank you for your support and advice with an indication of which direction to go. Best regards Edijs (Skog) Møre skogbruk

Ja, I tried to contact, no one answers, it's typical in Norway, nothing works for us during summer mass holidays, we have 3 weeks as Sundays.

I will get to the sensors during the holidays. Yes, there have been times when the stop mechanism has to be moved here and there, so that the rollers resume their nature. Let's start by checking them, disconnecting the sencors and bypassing the electricity. Thank you

Yes, very likely an electrical problem, yes, I checked the solenoid coils by applying direct power, then everything works, pull in pull out. This weekend I will begin a full electrical and ground check. It is interesting that when the position back the roller feed is working, and the small diode lamp lights up on the solenoid coil. The other position is not life. possibly the supply sencors themselves or, as the gentleman mentioned below in the topic, a possible electric sencors for the stop button. Thanks guys for the support, I'll let you know how I get on. Sorry for my grammar mistakes ((((

Please guys help me with advice on what to do. I have Timberwolf 240 THB The problem is that the shredder does not pull in, the rollers do not turn at all. Speed 2 fault lit up on the H box starting from average engine speed to max. I have replaced new belts, have tightened, alternator belt tightened, relays changed places, H-Box new just arrived from UK manufacturer Timberwolf. New solenoid block and coils new. Nothing to change anymore ((((( nothing changes I don't know what else to do, please advise, help Thank you, I look forward to hearing from you Regards from Norge