TRUCKER2

On 12/24/2017 at 16:20, TRUCKER2 said:

any one got a big press that can help ?????  pin 13 IS THE ONE I AM TRYING TO GET OUT   am i asking for help in the right place ????

it seem like i will not get any advice on here so how do i remove my post 

any one got a big press that can help ?????  pin 13 IS THE ONE I AM TRYING TO GET OUT   am i asking for help in the right place ????

HI CAN ANY ONE TELL ME HOW TO GET THE PIN OUT OF THE BOOM SO I CAN CHANG THE LOAD CENSOR  THING UNDER THE BASKET  ..I HAVE TRIED A 10 TON PRESS BUT THE PIN  WILL NOT MOVE 

thank you bob i will have a look monday and sort it

thank you bob is this a hard job to do my self

it is a nissan cab star ok why has this happened

HI CAN ANYONE HELP and tell what i need to do to stop this leak it is not FAST LEAK it is on the top of the slew ring it is a nut with a cap on it

if you have a post code you can use google earth to look at places as well for access .. i use it all the time to look at jobs it saves me time and money going to look at jobs

i am in to deep to walk away from it .. i no it will take time it is all about getting my name out there ..with word and mouth .and advertising .so to start with i have a low day rate and i will go anywhere as long as i can tick over and pay the bills for the first 12 month that will do me

just glad it has been sorted .. the next thing is the MOT ON FRIDAY then the tackle test next tuesday then that is it .. it is my first time running mu own business so far it sucks lol i am not expecting a lot in the first 6 month but i will be ready for the good time

well after a long tripto day .. a 1am start to go up to CTE and have the z20e tested it was the board under the basket ..now it is back up and running ready for the next job total cost £1500

hi all i have just started up with my Nissan cabstar pick up 3.5 ton with a CTE Z20E 18m boom on the back i cover East Sussex, West Sussex, Kent and London areas. plz have a look at my web page to see what we offer jules total access thanks for looking

will do it will be in 2 weeks time as i need to get the money for CTE to sort this out

eagleye no bud as the light comes on when i turn the key an i can start and stop the eng from the basket .. i have taken it to maps to day and he tried to reset the board that did not work .. so i will be off to see martin at cte to get it sorted .. it is a long way to go but it will be running as it should wen i leave

hi Philip in both boxes there are relays what you can see into.. which move wen i use the ground control but do not move when i use the controls in the basket the only thing i can do from the basket is turn the eng off and restart it .. by look of it the boards you can plug a computer in to it as there is spare plugs thank you for the advice

after doing the pump and filters and oil this week funds are low so i need to do 3 job then i can replace it as the loller test is in jan so it need to be done .. but even with it jam up i still have no controls up top

new pump and filter back up and running .. now just the cage load sensor to sort out i have tried to jam it up but no joy

o well new pump on the way from CTE uk .i will be back up and running friday thank for all the help

glad i could help as i am new to this forum

hi i had a chat to martin to day top man he is ... ok the filter number BT366-10 IF YOU PHONE hydraquip hose 01304842206 thay will get one next day to you

o well at last i have got to the bottom of it.. the filter was full of crap so the pump was getting very little oil .. i got a new filter but the pump has lost most of its power... i can only drop the legs if i shut the left hand valve off ..but i can not pick the truck up ,,so now on the hunt for a new pump or a recon that i can pick up to moz

i am not a fitter so i would not no how to take the pump apart or what to look for in side the pump it has taken me all day to check out the transfer box to the pump just to make sure it is engaging to the pump i am getting oil in to the pump with the eng running but only a drip on the out side

yep i see what you mean this is a big problem as i can not drop the legs to get power to lift the booms ..o well i will buy a pump and put that on them go from there

thank you for the info IVECOKID how do i bleed the system as i had a pipe go 2 week ago and i have only done one job them parked the truck up for 2 weeks ..where will i find the relief valves,bypass valves as the pump just stopped working and did not give any signs of it on its way out

friday the 13 lives up to its name i have spent all day working on the truck to sort out why the pump would not work // ... transfer box is all good no play at all .....gearbox all good ..... we run the truck with the transfer box on so we new there was power out of it to the pump then put the pump on with the out let pip off and run the truck it just drip out when the eng was running .. so i will change the oil filter and run it once more.. it that does not work the pump will come off and find some one to recon it