Andyroo

Good evening all ok I’m struggling with the 1928 safe track. The chipper doesn’t seem to want to pull in on the feed roller due to it not revving higher than 800rpm it’s been working absolutely fine until today I’ve checked the fuses and a 40amp had blown second one down replaced that checked the roller solenoid and cable tension any help would be much appreciated many thanks Andrew 

Ok thanks for your help

Can any one help me out we have a large walnut to take down steam is about 2m round at base up to about 15 foot to first limb nice and straight, can any one put my on to a buyer for the timber please ps tree is in Yorkshire

Yorkshire

It's not a bad set up to be fare most of us have tippers and 190 chippers, you make your money on over time. Time and half Saturdays and double on a Sunday not restrictions if you productive, team leaders run jobs make sure spans are cut and cut to spec, get time sheets in etc can't knock it to be fare oh there is always fault to be had if your prepared to work at night

Climb, paper work and minimal chipper use hahaha

Just shy of £10 per hour at fountains for team leader