jeff57

Will do, thanks for your help. Cheers Jeff

At least someone knows what he's talking about

I've only replaced the oil sender unit earlier and put new oil in as well, But I'm only going to get the oil pressure up by keeping my thumb on the override button and run it for a bit, but your really not supposed to keep it on there. As for the override solenoid unit I have not touch that at all. Been over all the connections, and replaced some that looked in a poor state, but it's have none of it, just cuts out after I take my thumb of the override button. Do you have the number of the guys at Greenmech Cheers Jeff

Hi Guys. I'm having a problem with my chipper, if anyone as got one of these Greenmech chippers then you will know how the start up goes. I put the key in the ignition, and press the override button, then turn the key to the right, listening to the clicking sound, then turn the key fully to the right and the chipper starts up first time - my problem is that when I take my thumb off the override button it cuts out. I've put a new alternator on it, replaced the oil sender unit as well as changing the water sender unit, but still no joy. You thoughts here would be great. Cheers Jeff

Hi Mark Just found the problam. Having checked every connection and checked all the fuses, it seams I missed one. It was tucked up behind the starter motor (yellow 20amp fuse) cleaned it out and put a new fuse in and it fired up straightaway. Cheers Jeff

Hi Guys Im having trouble starting my Greenmech Wood Chipper. It was working fine yesterday, untill the last time I started it, started fine, but when I pulled the large red lever to engage the chipper belts to stalled, and since then it won't start. Diesel engine turns over ok, as all seams fine, 3/4 of a tank of fuel but it won't fire up. Ive cleaned all the connections to the battery and all the other connection but still no joy. Your thoughts here would be greatfully appricated. Cheers Jeff