corners-trees.weeb

8 hours ago, Gareth Phoenix said:

Hi Martin is it ? you need to make sure that the two surfaces are clean on the taper lock outer surface and the inner surface on the pulley . but it sounds like the grub screws have not been tightened enough. Has the taper lock split ? If you need any more help I have qualified Timberwolf technicians you can talk to. Gareth of Green Plant 01483 235111

yes taper lock split thanks for the number iv got one from spectram but ill save the number for next time something happens 

1 minute ago, CallumA said:

A taper lock should never come off on less it was not tightened or excessive vibration

was running fine no vibration no warning sounds just a bang rotor seems good no play 

17 minutes ago, Mike Hill said:

How long after the bearings were changed did the wheel come off?

about 10 hours of running time

hi all in need of some advice my rotor pulley came off when the chipper was running been chipping with it all day is there any reason why or has it not been tightened up after new bearings was fitted any help would be much appreciated

hi looking for a climber don't need them full time just odd big tree they needs to be good at rigging my number is 01772 796868 or email me on [email protected] thanks

Wanted Climber for 2/3 days must be able to start straight away - Preston Lancashire. Call Martin on 07980058192 or Send us a message with details, wanted day rate and availability. Thanks!

It is the same as the one I used to hire although the one the hire shop had bits of exhaust pipe missing, along with other bits and was never sharp. It had been hammered and I begrudged handing him £90 quid a pop to hire it out. Thought it will soon pay for its self and I will only be using it for smallish stumps. I just want to make it the most efficient it can be. Will try giving it a good sharpen myself and see how it does

Thanks for the reply

I've been looking at putting finger teeth on it as a relatively cheap upgrade to the ones that are on but I've just had a look at the multi tip cutter wheel, it looks pretty good! Would you say there is a huge difference in performance between the multi tip and putting fingers on?

cheers for the reply

Hi everyone!

Just bought my first stump grinder, its got to be better the the blunt thing the local hire shop hires out. Has anyone any experience with these? It's going to need the teeth sharpening over the weekend and i'm wondering would it be best to send them to someone else to sharpen? Ideally i'd rather do them myself so if anyone could advise the best way to go about it, it would be much appreciated.

Cheers

Martin

Thanks for your help

Martin

Hi - my hydraulic oil for my ec150 2002 6inch Greenmech is in need of changing, has anybody got any thoughts as to which hydraulic to use?

Thanks for your help

Martin

Will be putting a link up for you in the morning

Cheers