mark hooper

Way too pricey for the bobcat. It should be the cheapest. Haggle if you can. You will be waiting months regardless of what any dealer promises at the moment. 

Hi thought I’d ask your opinion
Bobcat e20 £23k 2 lines
Yanmar Sv 18 £19850 2 lines
Cat 302.8 £ 20k 1 line
Or should I be looking at kubota etc it’s a minefield
I want the 2 lines for grab and rotator bobcat and cat are 0%
What are your thoughts please

Hiya Mark
Try searching for a root rake grapple. Good for logs and brash. I had this made, might be selling it soon because I'm fitting a crane and removing the loader. Ric

That looks a bit tinny you could message Swinny he has bought a Kelfri and see how he is getting on with it.
Whats wrong with muck grab handling brash i find log grab a pain when pushing brash.

Hi just after your opinion s good or bad
Looking to replace a muck grab for log grab to handle brash mainly
Fransgard £2k botex £2600 island £1200 kelfri £1000
I am drawn towards the fransgard as 4’6 opening has any one had or got one how good are they
Many thanks

Hi just after your opinion s good or bad

Looking to replace a muck grab for log grab to handle brash mainly

Fransgard £2k botex £2600 island £1200 kelfri £1000

I am drawn towards the fransgard as 4’6 opening has any one had or got one how good are they

Many thanks

Doesnt have same grinding depth or sweep
 
fsi has a huge sweep!

Hi looking for advice thinking of changing grinder run rayco 1631

At the moment

Like the idea of the 26 inch predator non radio control or 30 fsi

Suggestions please

Yes

Filter sat correctly on new seal

Thumb screw is on side of pump

I have opened thumb screw releasing last injector and bleed machine running

It's when I close off screw which is the tank return I presume

Machine needs bleeding again ???

Same problem

The dog on the starter caused the rattle on ring gear new starter

eBay £140

Sorted

Hi I have a Jensen A430 and I have changed diesel filter as per book

But when I shut off valve on the side of pump it shuts down

Any help appreciated

A case came to court Tpo tree pruned

Climber employed received a fine and criminal record along with director (owner)

He was more heavily fined

I think climbers fine was just a token gesture but still has a record

Have you paid deposit?

Hi

Is it a tp 200

Being sold by Russell Baybutt ?

Would the 200 suit 100 hp tractor

And how well does it chip

Mainly brash

Am I right in thinking the hydraulics are self contained

I.e. Connect pto and that's it

Hi looking at getting a chipper for our tractor 100 hp

What do you think of the tp

I've had no experience with them

Open to suggestions

Many thanks

Hi the cold weather got the better of the fuel This killed battery and caused starter problems

So far replaced battery revamped starter

But on the compression stroke starter still rattles against ring gear

And then starts no bother

Checked ring gear marked up on the 2 compression stokes

Any ideas ?

Much appreciated

Or do I just go with a new starter

:thumbup:Hi i have 2 sets of blades and bolts anvil and a few other bits if any one is interested

many thanks

hi what sort of value would you put on them? dark oak is worth a bit ive been told

hi they are in rast dorset

hi andy

please send info [email protected]

many thanks mark

hi

I.am after some guidance please . We have 5 large oak butts 5-6m long and an average girth 15"square

2 of these logs are over 70years old just solid heart wood

my question is how and who would be a potential customer for these?

I do have photo,s but dont know how to post but can email them direct

many thanks Mark:thumbup: