MS210, starts and idles fine, cuts out as soon as power is applied.

[Arghshh]

Checked the crankcase screws and they were tight, fired it up today with Aspen in and its working fine again.

 

For the benefit of others I did the following....

 

Blew out the breather hose and filter on the tank

Blew out the fuel filter and hose

Dismantled and cleaned the carb

Removed the exhaust and cleaned the mating surfaces and re attached it

 

I have a feeling it will stop working again as per previous posts I think the diaphragms, certainly on the fuel pump, side may need replacing.

 

Whatever I have done it seems to be grafting again!