Holder A60 loader advice

[Gareth Woolley]

Hi. Newbie here to the website. Hobby miller who’s just acquired a Holder A60 Turbo. Part of the deal included a front loader….. but not all the brackets are with it to mount it to the tractor.

I understand there’s 2 main types for the Holder A60 ( probably the same loader for other models of Holders) mine seems the shorter version with bucket/blade tilt rams on top of the loader forearms.

I have the heavy rear lower bar, that supports the 2rear upright towers (although the spacer tubes to mount this heavy bar under the front end swivel casting are missing but if someone could measure theirs I could easily make them). I have the rear upright towers but I am missing the brackets to bolt the front end of the upright towers to the front axle.

Anyone have these brackets or is able to post close up pictures of these brackets showing the bolts around the axle halves and which bolts are utilised to afix?

Cheers in advance 

G

[Gareth Woolley]

I tried looking on YouTube at the various vids on Holder vintage rallies, Holders in vids of forestry working but the best I could find picture-wise was a lad stripping and rebuilding his A60 and then a first start vid showing the side view of his tractor without the front wheel but the loader on his is “the other type” , longer loader arms with underslung cylinders for tipping the bucket and a fancy pivot in the front arms connected to the top of the bucket by bars. His was a grey loader ( manufacturers colour) 

My loader is green (Holder green colour)

In my internet search I came across a guy on this forum from about 10 years ago showing off his new paint job on his Holder, having the same style loader, I was hoping he or someone else with my type loader has some detailed piccies of the bits I’m missing.

Any help much appreciated

G