Jump to content

Log in or register to remove this advert

cameroncrofter

Member
 View Profile  See their activity

  • Posts

    15

  • Joined

  • Last visited

 Content Type 

Everything posted by cameroncrofter

  1. cameroncrofter
    Aye 👌
  2. cameroncrofter
    The carb was an oem walbrow boxed one o would take it to someone else but not many people if any work and saws on the island I live on 😞
  3. cameroncrofter
    Thank you very much for the advice you have been a lot of help and I have learnt alot 😊😊😊 I have put a new genuine cylinder and piston also new oem inlet manifold and also second hand exhaust and tried oem new carb still not running right 😞 starts but revs high with carb screws 1 turn tired setting them in and out but nothing then when not running as you crank it exhaust gas /vapours come out of intake I never took off the bottom casting so probably going to do that next I did order extra head gasket and exhaust gaskets as I wanted to just try a new flying before opening up the bottom end 👍
  4. cameroncrofter
    Just took it apart and think I’m going to just put a new piston and cylinder on it many advice on revoking old piston are installing new one ? Thank you for or the help so far 🙏
  5. cameroncrofter
    Tried with h screw all the way in and slowly turning out 1/4 a turn at a time and still blowing back fuel
  6. cameroncrofter
    Also open exhaust up more and still fuel coming out of intake
  7. cameroncrofter
    And air filter and inlet soaked with fuel again
  8. cameroncrofter
    That is with the L screw turned anti clockwise been tweeting both screws but can’t get it to idle nice with out bogging
  9. cameroncrofter
    Dicked about a bit more and now running a lot better 68133509315__0DC85CC7-69DA-49ED-8A55-00A2FA155D1A.MOV
  10. cameroncrofter
    Put new flywheel on and still no luck not as much fuel now but still over reving
  11. cameroncrofter
    Tried adjust carb screws no luck just revs real high and back fires just attaching a video of what fly wheel looks like I do have a newish second hand fly I can put on and test 68133225545__DF9AD002-8338-422E-A99A-FF40633737A3.MOV
  12. cameroncrofter
    have also taken muffler off and cleann around gasket and new gaskets will try making an wider opening in morning
  13. cameroncrofter
    video-1659552452.mp4
  14. cameroncrofter
    this is my second 350 avsoulotley boggles my mind current;ly uploading a video of it running
  15. cameroncrofter
    HI I HAVE A HUSQVARNA 350 and it start but when running bogs down and revs high spiraticly while running also fuel spits out of intake tried new carbs fuel tank nearly everything but nothing is working :(

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

Articles

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

  I accept