Jump to content

ag Ed

Member
  • Content Count

    31
  • Joined

  • Last visited

About ag Ed

  • Rank
    Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. haha thanks, i don't ever give a toss what other people think of me, i know i'm a silly twat and i'm happy with that! 😛 it just can be a bit embarrassing when it's a subject you're experienced and even qualified in, i blame the years stacking up!
  2. Sorry I've just realised I'm a twat and wasn't thinking straight, I blame the heat You are absolutely correct, yes on an older saw with pre retarding coils I can now see it could be a very real risk Still nothing conpared to the standard fordson, I saw a lad break his arm in 2 places and shatter his wrist starting one of them!
  3. you silly puff! something like a bloody 3120xp or 880 couldn't backfire and hurt you, basically not possible as far as i can see with a recoil starter! you try kick starting motorbikes that are far too big and far too heavy for you when you're far too young, or hand starting old tractors then you'll know what a back fire is! a few bruised shins, forearms and broken wrists and arms later! 😛
  4. so what's the biggest bar you run on a 560xp reasonably? got my 560xpg on a 16 inch atm and it pulls like a train and cuts like a pissed off wasp on steroids! but the 16 is just a bit small for some of the bigger stuff. i just can't justify a bigger saw for the time being so i'm thinking just get a bigger bar to slip on when and as i need it
  5. recently started using a brand new stihl fs91, an absolute beast, stacks of power and lovely to use with relatively low vibrations for a machine that size on line or 2 edge blade (just make sure you're not a knob and accidentally mount the blade pissed not on the bush... from what i hear that makes it vibrate like hell?! just a bit more power than the fs94 which i've also used, fs94 is more of a garden machine for grass, nettles thistles and capable of a bit of brambles with a blade. fs91 is a truly straight professional machine that flies through gorse, the thickest of grass and undergrowth, brambles etc and even saplings no trouble with a blade fs94 is a good machine but just a more professional build quality in the 91, the 91 has the squarer engine casing which is their professional line
  6. i was in my local dealer the other day and got chatting, got onto the new husqy fuel as they'd just got the first batch in, the claimed the 2 stroke stuff was just aspen rebadged. anyone else heard this? same sort of price as aspen and red can for 2 stroke and blue can for 4 stroke so it would make sense. my local husqy dealer is far closer and i much prefer them to my local aspen stockist so will happily move to them for fuel is it's the same juice at the end of the day
  7. As said highly likely clutch but it could just be that the tick over is set too high But yes back to the dealer and they should sort for free as it was sold as fully working
  8. ag Ed

    50 cc saw

    A 560 Seriously though a love my 560 and tempted by a 550 when money permits just as a lighter and less thirsty saw Having the electronic carb on my 560 I would whinge if I had to have a manual adjustment carb as my daily saw
  9. ag Ed

    Suspect clutch?

    That's the thing, it won't hold on to dragthe engine down to it's knees, the chain stalls and the engine spins freely, slipping the clutch I think that could be a good shout though to pull the clutch out and clean it all up. Not sure if it's ever been done as I haven't been solely responsible for the maintenance of this saw from new And yeah being a fixed rate oiler this one does seem to be rather oily
  10. ag Ed

    Suspect clutch?

    Yeah that would be my thinking that even if the clutch isn't knackered yet a 16 is just too heavy on that engine and clutch Just a shame he's currently got a good 16 bar and about 4 chains My old man has an identical 181 c-be which suits him perfectly, he does a bit of firewood, clears the odd bit of brush etc and takes a few branches off etc and it's only used half a dozen times a year if that but he's got his on a 14 inch and it does definitely pull it better. Then again he hasn't used it enough to touch the clutch! Customers saw is going back tomorrow morning but next time I've got it I'll stick my old man's 14 inch bar and chain on it and do a few cuts to see if it is a bad clutch or if it's just too big a bar
  11. ag Ed

    Suspect clutch?

    I did take a video to show you but it's 70mb and the site only allows 7mb and photobucket no longer supports videos, any suggestions?
  12. ag Ed

    Suspect clutch?

    I've got a stihl ms181 c-be in from a customer to sharpen and thought I'd try to diagnose an ongoing nagging issue on it It starts cuts and runs fine but with any pressure put into the cut (such as using the dog) and it just stalls the chain, slipping the clutch I assume It's only a couple of years old or so and not in daily use but imo it's underspecced for his level of usage (a very large garden/small estate and doing a lot of firewood as the primary heatsource of a large 15th century house) I reckon the clunch I'd knackered, thoughts? Oh and it's on a 16 inch bar which I feel is a bit big on a 30cc saw
  13. right i'd best get on google, still over a month to learn it so even i stand half a chance!
  14. that's some great pointers thanks pal, i'll keep them in mind and have a read up on the 5 steps to a risk assesment, on farms which is where i'm currently working we did all the risk assesments 20 years ago and then hid them away on that shelf over there and forgot all about how to do them! going to have to get my self back into the routine of them if i'm to have any chance in the tree game!
  15. thanks, fortunately i only did my cs 30 in about october or so so i'm still fairly fresh from it and i tend to like keeping in good habits anyway so i'm pretty diligent but yeah i am on the saw regularly so i obviously don't always run by the book but i'll keep it in mind

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.