dan blocker

Is this not Heras fencing? With scaffold poles as described above as bracing. Available for hire from most large Hire companies. If its long term might be better to purchase then sell on at end of job/ contract. Its possible to purchase screening close woven panels to fix to the Heras panel as a anti view screen.

If you still have the laverda's they were a better investment than a harley anyway, with far more class.

Why two lockers in front of chip box? puts the bulk of weight behind rear axle! Unless it'll only carry a couple of wheelbarrows full anyway:confused1: Too busy looking good and of no practical use.

I can't believe people think financing a new truck can be similar financially... There maybe other benefits, like image and reliability..

 

I agree - Image is very important when running a business. Its your mobile advertising hoarding. The 1st thing very often a potential customer see's. I know that your ability, work ethic, etc is important to us but your dealing with customers where very often first impressions get you the job! Don't be put off by a truck with above average milage if its got a good service history, looks smart enough and one careful owner? Having said that don't turn up in top spec 17 plate Range Rover:001_rolleyes:

The scumbag is someone making a fella who didn't know any different take em back 200 yards just to stick the knife in...

 

If it was me, I'd maybe take em back if I was asked politely, but if If some idiot demanded I take em back.. I'd be weighing up which side of his jaw he was going to get whacked on...

Are you going to the arb show? maybe we could meet and have a chat over a brew.

I really don't think anyone would mind, if you just went and moved it. Just make sure you leave the land how you found it, minus logs of course

You are of course joking! Arn't you:001_rolleyes: I've got some logs and trunks "left lying about' on some of my ground and if someone took it upon themselves to remove them I'd go absolutely ape! Its theft plain and simple:thumb down: Caught someone once who was loading up the back of his Volvo Estate - Yes, a volvo estate - you know the type:001_rolleyes: When I asked him what he thought he was doing he thought it was OK to to take them! The fact I had fell the trees, burn't the tops, cut it all into logs with a chainsaw! he thought it was OK to take them - raging by now(get the picture!) Anyway I asked him to put them back, he began to throw them on the ground at the back of his car, until I explained I wanted them put back where he got them from - 150 yards into the wood:001_huh: I waited till he carried them all back from where they came from, then wished him a good day! or words to that effect:001_rolleyes:

That would be ideal. Alas, that weekend is in the calendar as "quality time" which, sadly, probably doesn't include taking her to the ARB show!

 

I'll look out for it next year though.

if the weekend is quality time go on the Friday:001_rolleyes: Have a day off work, leave the house in your work kit(place your tidy clothes in truck night before:laugh1:) remember to change back in to work kit before you get home. Keep a cup full of sawdust in the glove box and throw it over yourself before you are greeted by 'her indoors' after another hard day at work:thumbup1: I know i'm knackered after all that walking about at the show:001_rolleyes:

Oxford Fire and Rescue on news last night with Fire Chief being interviewed showing tender in background with a couple of chainsaws in one of the lockers? Thats in addition to the rescue saw, so they must have a tree cutting capability? Unlikely to have equipment issued without proper training with current Elf and safety and duty of care etc!

Are you sure about that ? I've been informed on this site that there's hardly any chance of them going bang. I'm off to work now before the "experts" crawl out of the darkness and explain why.

Thats not what I said on my post David(or at least not what I intended!) All unexploded ordnance should be treated with respect and not handled unless you know what your doing. Always call the authorities concerned. Anyone who thinks different perhaps should go to Bosnia, Cambodia, Vietnam, Laos, Afgan, Iraq etc, look for an area marked ''mines do not enter'' or words to that effect, put on your best chainsaw boots and stomp about blindly! then you'll be doing the locals a favour:001_rolleyes: Take another look at that crusher! I bet the digger driver who dug that out of the ground earlier in the day went home for some clean underpants. The picture doesn't show the fragmentation that was probably scattered across the area? Hope no one was injured in that incident.

How good a mate is he, do you value his friendship, does he let you ride his brand new Ducati, enjoy nights out with him cos you fancy his wife!enjoy the banter, have a crack, old buddies from school:confused1: Don't care if its all of these and more - tell him he's crap and say its your way or the highway! thats if your going to give him a 2nd, 3rd or 4th chance by now:001_rolleyes:

Dynamite leaches nitro glycerin,TNT is a totally different explosive,TNT can also leach accelerants,Dave and his stump grinder would be seriously compromised if the shells were still viable.

Agreed - Nitro can become very unstable and can sometimes be detonated by a blow with a metal object on other metal or stone or heat, TNT and other high explosives such as RDX based explosives are more stable and require a small booster charge to detonate them(so does nitro in normal situations). Remember in this type of find the explosive is encased in a steel/cast iron casing and is therefore the explosive fill is likely to be protected and not degraded sufficiently to make it safe, so its possible the explosive would still detonate, it would of had some type of fuse/ booster charge/ detonator to initiate it - thats the dangerous bit:001_huh: All bombs require some sort of initiator - as is the primer in the base of a .50 round:001_huh:(what a character grandad was:001_rolleyes:) 1WW/2WW bombs contained Nitro and or TNT based fillings so you are unlikely to know what the danger is:confused1: 70 yrs old or not standard PPE would not give you any protection if one did explode and to think its old so must be OK is fool-hardy. as they say - If you hear a clock start ticking or a fizzing noise, see smoke etc - bend down, put your head between your legs and kiss your arse goodbye:big grin:cos its goodnight Vienna:sleep1:

Reduced a beech tree that had been previously topped today. Wanted more light in the garden but still wanted to retain the tree

 

Been done before a few years ago by photos, you've done it again and it'll be shading the garden exactly the same in a few more years. Looks like you've got some regular work there.

A mate of mine runs one with a 8ft IW tipper trailer and tracked TW150, swears by it, Updated to newer models as well for more than 15 years. Another mate did same and had nothing but bother(especially clutches!)

I wouldn't touch them.

To be fair to brickies, their trade is out in the weather and one of the more likely ones to be stopped due to bad weather.

All the trees I do are outside in all weather's as well:confused1:

Not only is PPE, climbing and lowering kit expensive, after a couple of years we have to throw it all away 'cos its out of date:001_huh: Even thought it looks fine to me:001_rolleyes:

Chaps, just to make things clear on what I posted? Not necessarily my own view. Only put a rough sequence because the main point I'm trying to make is-how could the courts view what methods we use to achieve the aim should there be a requirement to appear before them?

Reducing the Catherine parr oak at thorp perrow arboretum today.

Had strict instructions from curator and a consultant as to where to cut as they had decided to significantly reduced the sail of the Crown in an exempt to save the tree.

 

It truly is a massive tree at over 400year old, shame it's so badly decayed.

 

Sent from my D5803 using Arbtalk mobile app

If they were that concerned about the tree have they not left it a bit late giving you the go-ahead on doing the work? Surely the saps rising? Just my thoughts, sure others will know better.

The judge says - ''every one agrees the work should of been carried out from a mewp''! If one judge as already said it can it not now be used as a precedent? I was told many years ago that this should be the same for all tree work:confused1: With a risk assessment the safest option should be employed at all times, carry out the work from the ground, use a mewp, crane, climb the tree only as a last resort, etc. Cost should not be a factor! I don't personally do it this way - just throwing it out there. I'm putting the tin helmet on now and taking cover in the bottom of the trench waiting for incoming:001_rolleyes:

If you can't wait a year,what you should do first is apply a coat of mordant solution before painting

 

http://britanniapaints.co.uk/wp-content/uploads/pdfs/Roofs/Mordant_Solution.pdf

 

Easy enough to get hold off .

I support what Remora107 says - had a new Land Rover chassis, left it 12 months(don't ask:001_rolleyes:) washed it off with Mordant solution and then just primed and top coated it black as normal. Its cheap, easy to apply, and just hose off, leaves a blackish colour as well before painting. Paint is still good after 3 years - better than a new puma 12 months old! cos I'm sure they used a water based emulsion in the factory:confused1:

I remember my father cutting down 100's of Elms in the early 70's and all decent butts went for milling and if my memory serves me correctly pit props? Obviously what wasn't millable went for firewood and the rest burnt on site. There were no restrictions in the movement of wood killed by Dutch Elm Disease in those days at least in our area.

If I were you and your going to the trouble and expense of having the tree milled I would have it cut to the sizes you require to build your cabin. You require some drawings and do a cutting list of the timber that you would require. Work out what the oak but would yield(ask whoever you get to do the milling) as they would be able to confirm what is possible - thats if there are no hidden horrors inside the butt such as rot, shake, fissures etc.

Good luck with the project, using your own timber for such a project is very rewarding - even though the tree will probably not provide as much timber as you would hope:001_rolleyes:

[ATTACH]218112[/ATTACH]

Am going to put a tipping back on my Hilux

Very nice looking truck, too good to put a chip box on:001_cool: Get an old one and keep the new one for Sunday best:001_rolleyes:

Become a EU migrant worker here, go home for a month and get all your national insurance back:sneaky2: Thats of course if your employed legally and not on the cash only black market or working for a gang master:001_rolleyes:

I once hit a steel wedge some fool had put into the cut on the other side of the tree, cursed and ranted! then realised the fool was me!

Is it not too late to Flail a hedge? and I don't mean 10.40 at night either:001_rolleyes:

I've spotted the problem - they don't take to kindly to being planted on a cliff face:001_rolleyes: