Mygalomorph

Husqvarna 592 XP®G 9704934-01 | GPLSHOP WWW.GPLSHOP.CO.UK The Husqvarna 592 XP® will provide you with best in class cutting capacity. The... Dont know if it's just "show off" but it's listed as in stock

Stihl MS 880 - Markedets største motorsav på 121,6 ccm. WWW.SKOVOGPARK.DK Stihl MS 880 er markedets største og mest ydende standardsav... This Danish dealer stihl has one in stock, its on "sale" just shy of 1100 £ ? But if you ned one, spared no expense ? dont know what import duties adds up to after Brexit ?.But shipping ought to be cheaper than importing from Canada.

http://www.madsens1.com/bnc_filing_cb.htm There are MANY guides on the internet, how to square file, Also lots of videos on Youtube. Thats how i tought myself. It's mostly done in North america. It's NOT easy ! I only do it in my workshop, with the bar in a height adjustable vice. It takes me 10-15 minutes to sharpen a 20" - 24" chain ? Vs. 5 minutes with round file. When im out in the forest, i always have 2 or 3 freshly sharpenend spare chains(and 2 "normal" round filed chains ?) Square filed chains easely cuts 15 % faster, Maybe even 20 %, but the wood must be very clean, as it loosens it's sharpness very easy in dirty conditions. Start with a 15" or 18" chain, and do it "just for the fun" or the challenge of it. It is'nt something i wanna do all my cutting with, especially not in dirty wood, But with clean wood and when fast, if not to say VERY fast cutting is desirable, square filing is hard to ignore. It's like having a 20 cc larger saw and with a bigger rim.

Quote: "I want to give the saw to my son, he may not be as careful as me when it comes to mixing, that was the main reason I was thinking of going for AT or MT" Are you referring to "mixing" the 2 stroke oil and petrol ? Because No AT or MT will correct improper mixing ratios, they will "only" adjust the amount of fuel(petrol and 2 stroke oil)being sucked through the carb, to achieve a certain level of revolutions.

Are YOU a manufacturer of chainsaws ?? ?

Congrats on youre 50 cc 346 xp ? When youre Ready to upgrade for the BIG logs you were talking About, i've found just the right Saw for you ? https://www.gplshop.co.uk/husqvarna-forest-garden-products/chainsaws/husqvarna-professional-saws/husqvarna-3120-xp.php

IMO the Tsumura are marginally Better regarding wear and slightly less friction in the rails and sprocket nose. But ask the seller About weight, stiffnes ! He Also have files for square filing, look in the PFERD drop down menu

Plug it back in and "teach it a lesson" by placing the bar on an anvil and pound the plug/rivet with a big hammer and a large punch or chisel ! That'll teach it ? Take care to do it from the small diameter side ?

This one is in Germany, he also sells Tsumura bars https://www.premium-motorsaegenzubehoer.de

Wise choise ?? i would use Red Line too, if i could buy it, here in Denmark, in larger bottles than 473 ml ? I would though, Very much like to try Echo Power blend X, just out of curiosity ? But so far i'm sticking to Husqvarna XP oil at 40:1

Could you please clarify which 2 stroke oil specifications "youre" ? oil conforms to today ?? The reasons i stopped using Aspen 2 stroke fuel were; 1. The 2 stroke oil used at the current time(2015) had the specifikcation JASO FC ! My saws require JASO FD 2. Aspen Will ONLY sell their product through Their dealer(stealer) network, i am still using alkylate fuel, Another brand though, and I buy it without 2 stroke oil and mix in the oil specified by the Saw manufacture

Only considering the headline ? I would recommend a Husqvarna 372 xp, with a solid tsumura or sugihare 20" bar. You'll be thrilled and all youre work mates envious as hell. The 372 xp is still available in at least one Swedish webshop, that happyli ships global. https://www.gplshop.co.uk/husqvarna-chainsaws/husqvarna-372-xp-g-x-torq.php

20" .325 GB bar on mine at the moment and a 7 pin sprocket and it eagerly keeps cutting with the whole bar burried in beech, but I also prefer it with an 18" tsumura bar and 8 pin sprocket

Husqvarna 560 xpg muffler modded with 18 " Tsumura light bar and oregon 21 lpx

I would give it a liberal muffler mod with dual outlet and add 25-50 ml. more 2 stroke oil per 5 l aspen/petrol , so it's running on 40-1 or 32-1, the extra oil increases compression slightly, the muffler mod lets the saw rew faster and hold high revs in the cut. And it's a simple 15 minute job, just make sure ALL shavings are blown/washed out the muffler, before you bolt it back on the cylinder

Cyllinders on modern saws are made of aluminum alloy and transfers, intake and exhaust ports are generally not chromed or nikasil plated, so be cautios in those areas or acid or base will "creep" under the plating and corrode the edges around the unplated ports, resulting in loss of plating. I would recommend any one to use hydrochloric acid over sodiumhydroxide, because of the chemical burns that hydroxides courses even after very brief skin contact , I WONT start explaining what happens in the event of eyecontact 😵 Hydrochloric acid may SMELL bad, but are much safer. But of course, stay safe and wear glasses and rubber gloves 😉😎👍

Husqvarna 576xp if you Wanna save a litle fuel , Husqvarna 372 xp if you Wanna save a litle weight

I normally use a booklet with either mid- or chest diameter and length and then just read out the volume of mass in the trunk, if it's supposed to be chippen, i then multiply it with 2.6. So 1000 cubicmeters solid wood turns into 2600 m3 chips I also use Aktuelles von forst-rast.de • Informationen aus der Forst- und Jagdwirtschaft but it's only in German but I read it

Sorry to hear youre in pain, been there , done that and I aint going back 😉 hopefully. Had an rally bad tennis elbow for far to long, and in the end the docs an physios were real concerned that the tendon would burst/ snap. Then i research a bit and fund out about PRP treatment wicth is short for PLATELET RICH PLASMA, and wtf is that ? Your own blods platelets, concentrated and then injected in the tendon and adjecent areas. Worked Wonders for me 👍 Look it up and see if it's way for you

I believe youre right Stubby, but I can only get it in pint size bottles here, at the double price 😣compared to Husky XP, so I'll continue to feed my 4 XP saws with their own "Mothers milk" 😉

I use Aspen 4T and mix with Husky XP oil at 40:1, i prefer Huskys own oil witch is Jaso FD in classification, Aspen 2 stroke oil is "only" Jaso FC. Apart from that, Husqvarna has, here in Denmark, just announced the coming of their "own" alkylate fuel, witch in the 2 stroke version is mixed with their own XP oil in 50:1

Well well well :lol: Didnt SAWTROLL tell all you knowalls Sorry i know i shouldnt, just couldnt help it:laugh1:

good on you, no need for making it more complicated, when the return is merely cosmetic What about the internal baffle/deflector ?? I presume there is one ?

I bought 2 sets of two chains a couple of months ago,the first sets of chains are 14" 3/8 low profile .050 , witch they claimed were FULL CHISEL, BUT they were NOT. they are some ..... form of safety chain with a gigantic annoying bumper link :-( so much for trusting fleabay vendors product description. the other 2 chains were for my Husqvarne 536 li, witch wears an OEM 12" 0.043 45 drivelink bar, Piranha/Rotatech advertised a set of two chains for Husqvarna 536 Li, witch i added to my order they partially bacause they claimed these also were full chisel, so why not ?? NOT becourse rotatechs chains only got 44 drivelinks and NOT FULL CHISEL :-( so now i got 4 chains, oh no wait, ive got 4 loops of scrap metal, and ive even paid for it, and im not gonna return it since i live in Denmark and postage to UK would be like 2 stihl chains and a sugi bar. So please Northernarbsupplies, stop acting like desperate gypsy/china scumbag doorsalesman. I hope I havent made to many misspells, hmm is that one or two words ? never mind, have good one Ulf

She has just encased herself and the eggsac to protest herself and her offspring, when the spidernymphs are ready to lave the eggsac, she will open it and the nymphs will leave the eggsac, but they will stay with in the encasing until they molt for the frist time and the the Mother will open up to the outside and the offspring will disperse into the outside world.