Jump to content

Log in or register to remove this advert

carver83

Member
  • Posts

    91
  • Joined

  • Days Won

    2

Everything posted by carver83

  1. Ok , they go for just over 3k new and go for around 1.5-2k used depending on condition , logosol f2 new £1680 & f2+ £2040 Inc vat (bare mill ,which is what Iam after), so used I've seen logosol f series go for 1-1.5k and farmers m7/8 £750-£1000 so in terms of value roughly the same, so again a perfectly reasonable trade , which is why I asked. Rather dig out stump with a spoon ? Ever used one with sharp teeth? Guess not. Can you store the cheap rockmachinery stump grinder on a shelf or behind truck seat for them last minute "could you just jobs"? Or have room for another 200kg piece of machinery. Of course no offence taken, this is the internet after all.
  2. Swap still available if anyone's got a logsol m8 or f2 mill or logosol timberjig with rail gathering dust👍
  3. Cheers all!, yea finish on Nessie was tedious a lot of area cover , did it with manpa gouge cutter, so bit faster then with tip of saw👍
  4. Two of the more unusual carvings from this year, E.t finger lights up with small led 👽. Nessie was to be used as seating for xc eventing course by a pond
  5. Iam not far down the road , also Simon (wisewood) on here is the carver in Southport 👍
  6. As above, definitely go for one of the caps, I've got the JSP powercap , expensive for what it is, but probably spent at least that amount on all sorts of mask/goggle/glasses combinations over the years
  7. Are you on crack? That's exactly who Iam aiming trade with🤣
  8. THIS ADVERT HAS EXPIRED!

    • FOR SALE
    • USED

    As per title, this is to fit a ms880 (SAW NOT INCLUDED) this was a used model which I purchased from predator at the start of the year it's had a full service with new belt,bolts,bearings etc ,comes with diamond grinding disc and set of new teeth , can send more photos to interested parties. Update would consider trades/swap for Ifor p6/7/8 or bateson 720 trailer or Sherpa attachments bigger wheels/grabs/logsplitter etc

    £1,500

    Cheshire

  9. Chainsaw stump grinder still available gathering dust , ideally swap for logsol m8/f mill
  10. Cheers lads thanks for the comments👌, as always the order book is fully open🤣
  11. Hi, pm me a price if you do decide sell 👍, just seeing what's available used before looking at new, cheers
  12. Carved from oak with Danish oil finish 🐟
  13. Not much really you can do if it was green when carved, I've found heavy oiling then varnish finish can help reduce but not stop the splitting 👍
  14. As per title , any of the older logosol series for sale m7/8 or early f series ? Also got a terminator chainsaw grinder(see listing in classifieds for more details) be up for swap with if any interest
  15. I've got a terminator saw attachment back up for sale , check out the classifieds. Just that the new teeth have had one small stumps use
  16. Few carvings from end of the year another school bench , pair of hobbits , bear, German shepherd bust and a pair of Kermit's . All carved from oak 90%ish saw work with fine details with the Dremels and die grinders👍
  17. Hey up, I've got the rear handle battery Stihl msa200 & 161? used for both tree work and carving, but recently my petrol echo top handle was playing up so I went for the Makita battery topper and it's really good, if had time again I would of brought the Makita rear handles instead of the Stihls and saved a lot of money and brought stack of Makita batteries with the saving.
  18. I had this made up by local engineering firm, cost around 90-100£, weighs 20kg. Fits original bolts holes so no drilling and looks factory kit, hope it helps👍
  19. Nice one Dan, I'll give you ring in the week👍
  20. Thanks for the reply, which model/make have you got? Are the oxdale ones any good ? Or are they more or less the same thing just different colour paint? , Cheers
  21. Anyone running a log splitter on Sherpa agri , which model and how is it? Cheers
  22. Few stumps and carvings from shows this year, all around 90% chainsaw then squeeze out the detail with die grinder s and dremels, some still for sale and orders being taken for that time of year fast approaching!, Will carve anything and everything to order, cheers

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.