segaiolo

the excavator you saw in the workshop belongs to an excavator mechanic in the area, hires it if you give me some suggestions could change a bucket or build a tool a plow or a suitable tool to do the job, the rake you mentioned costs about 1000 € uro, a costly figure for us, maybe modifying a bucket or using metal scrap recovery provided by a scrapped we can build a mechanical claw or a suitable tool, what do you think? the standard excavator bucket proved to be insufficient due to the modest potential and performance of the excavator, a tool is needed to tear and tear roots and to extract superficial stones, thanks /www.tractorbynet.com/forums/build-yourself/235448-diy-ratchet-rake-2.html

the ground is small about 5000 square meters, you think the small excavator is sufficient, as you can see it has been abandoned for some time and there are no access roads that can be traveled by vehicles so I believe that a crawler excavator is the best solution to climb slopes and create paths truckable track, the standard bucket has small teeth to tear the soil tearing and root out roots, quarrying stumps and shrubs, you recommended. ripper plow divider? We are cutting them by hand but for the roots we need the strength of a suitable mechanical means to choose, just small excavator? https://youtu.be/1VxweDi6SC0 https://youtu.be/XpL1573mGXI https://youtu.be/isKUTumubiU https://youtu.be/ZU1Mtg6HsAk https://youtu.be/v9WkCro2JDQ https://youtu.be/JbL8yZfp1B0 https://youtu.be/3BiGfDoUchg

hello we will have to clear a sloping ground in the hills, we need to build a rake to clear the soil to root out roots to remove stumps to shrub bushes and rocks, you would have some suggestions thanks we would like to use this kubota excavator and build a rake bucket by hand some suggestion some photos or drawing with project? MarcaKubota ModelloKx71-3 Anno2008

can anyone help me please, should I buy the material and I would take the measures, I modestly consulting tables of materials would choose 5 inches (boxed steel tubes) for the pillars and 9 inches for the beam cross What do you think? I enclose additional drawings Design and Construction of a Portable Gantry Hoist.pdf

hello, I do not know if you can help, however, expose the problem: I should build a steel frame to be installed in my garage, that would be a small overhead crane moving, measures would be: 10 feet wide 11 feet high, 7 feet gauge base flow 2.3 tons, type gantry crane as I need convenience to perform heavy work, in the cross should I install a shopping cart with a suitable chain hoist, should size the horizontal beam pillars and gusset, I would do it with H-beam or hea and tubes molded case, what do you recommend? thanks to those who will provide useful suggestions, the next

a final opinion if not too much to ask, what do you think of trailers towed by loaders, excavators matching trailer I had been recommended by a friend to pick up stones, he with hydraulic clamp and trailer towing us the spietra ground after plowing, I saw on the net that the backhoe use this system to match the shovel with the trailer I think the JCB and Lannen Multimate, what do you think of this solution for forest and landscape? Effective or slow and clumsy, who preferred solution, two machines for a dig and load and one for transporting and unloading '

thanks guys, in fact it does not have to travel long distances, can be a good abinamento excavator with trailer, the web I found many small excavators with trailers, that weight can tow a midi excavator Takeuchi tb180 fr? if you have photos or videos that help you call to attach them as an example because the next

hello, I'm new to the forum, having to carry out the work of restoration forestry, restoring roads, restoring stone walls restore stepped terraces, restore hillsides collapsed, transport stones and waste material, I was advised to use an excavator to which tow a trailer tipper instead of using two machines what you think is a good solution you would have alternative solutions or machines due to suggest await suggestions