Transformer

Unimog U2150 1991. This is a lovely simply example, prior to us it was a Lime spreading vehicle. As a result there is next to no rust on the cab. There are a few spots around window etc as you would expect with a 30year old vehicle, but structural it is mint. As a 2150 - it is over 200bhp, on a longer wheel base. From it original life the mog has ‘factory lift spring’ - so I’m told….this means the body and cab sit 2-3inches higher than a standard 2150. Great mud clearance! Tyres still have rubber spikes on, they have not done many miles. We have added an uprated Atkinson Vos hydraulic pump, services to front and rear, a pickup hitch (Atkinson Vos) and a new Alu rear tipping body. We do have a flat bed frame if you would rear her. The Mog has been given a once over by Paul Howard, who sorts air lines, rear brakes and fitted the hydraulic system. She is 100% ready to work. We have had a change in contracts, hence swapping larger kit for smaller and this is part of this business move. Can be sold as is with the Alu back, or for a lower offer will remove and sell as a chassis or flatbed (red body in one image). Price is for Unimog including VAT, full receipt provided. Listed on other sale sites, will be withdrawn if sold via one of them.

DAF CF 65.250 hiab crane 4 extensions, tipper. With services to run grapplesaw, muckaway grab. MOT - Nov 2022 LOLER - July 2022 143,831km 2003 (reg) This lorry was purchased by us in 2021 to give us a working hiab crane and allow a grapplesaw to be fitted. It was a cheap way into a growing market and we have no doubt that grapplesaws - lorries or telehandlers are going to the future for a large amount of tree work. We need to move to a euro 6 lorry as we have new contracts within the ULEZ areas, hence our reason for sale. It is still in use so mileage (in km) may increase. Sections of the tipping body floor have been replaced, with new supports welded in (see photos). The lorry has a Hiab 122 D-4 CL crane, this is a 4 extension crane with twin services to the end allowing for use with clamshell bucket. The crane as a remote control to allow free movement of the operator around the unit giving great vision and control when operating. The control unit is supplied, with 3 batteries and an in cab charger. The crane was LOLER in JUNE 2021 by Taylor Commercials and all the pipes highlighted as damaged replaced, including all the king post and support legs. The lorry and crane has been maintained by Taylors Commerical, Guildford, currently on a 6 week inspection cycle. They have also done MOT (Nov 2021) and LOLER (June 2021) inspections. We would be happy to put a new LOLER on the crane. The lorry could be put to work tomorrow if you wish, it is ready to go and will continue to be used by us until sold. Any sale will be plus VAT. Listed for sale on other sites, so can be withdrawn

Bandit LD150 Towed chipper 2008 - disc chipper It is a comfortable 12inch chip, but just over 2ton to tow around. The hydraulic opening rollers, off-set fly wheel and size means that this machine will eat timber. We purchased in 2021, but now upgrading to a newer unit hence sale. It was pruchased from Field & Forest, it has been refurbed by them - paint, anti-stress, electrics etc. We have run it for around 8months, without issues (it is not our everyday chipper, but used for larger jobs only). REDUCED TO £19,000 ONO + VAT