Logit

EGO battery mowers are getting good reviews, worth a look. Powerful 56V battery + motors and the batteries can be used in all of their machines e.g. blowers, strimmers, hedge cutters etc. They also do a multi tool. The latest motors are brushless so no brushes to wear out and apparently more efficient than motors with brushes. Fast charging as well. YouTube has plenty of reviews.

Probably too small for your needs. but I have been using a Scheppach RS350 for various garden projects and it has done a very good job, there are videos on YouTube of various Scheppach models in action. Powered by a 230V induction motor.

Isn't that part of the Governments new smog control system, when the smog in London is reaching high levels, then your stove will just shut itself down remotely controlled from smog control HQ Control centre talks to phone, phone talks to stove....

A wireless keyboard added to a tablet could be an interim step, makes entering data a lot easier since it is a real keyboard and you don't have a virtual keyboard clogging up half the screen. You get to see more of the web page and less scrolling around. I am am typing this on just such a setup Office type apps also available for tablets including Word and Excel (but with less functionality than their PC counterparts).

Wow, I didn't realise that you could run an X27 on Aspen, clever stuff

One thought, if you need more than 1,600kg pull from time time, then a pulley can be used. The big tirfor is a lot heavier than the 1,600g tirfor and the big tirfor cable is much heavier as well. I picked up both sizes at an auction for £20 each, I sure was lucky that day. I bought an extension cable for the 1,600kg one so that I can either double the length of pull or double the pull with a pulley, quite a flexible solution. Make sure that the strops and shackles are strong enough...

Another vote for Nilfisk, a real quality product. I bought the 150 bar one a few years ago after my Karcher packed up. The 150 bar shifts a lot more from patios compared to the 110 or 130 bar machines. Yes, it is quite a lot more than £200 but worth every penny in my view.

Horizontal ?

Another thumbs up for L&S, I have had great service from them.

Hi Bob, I haven't read the whole thread, so not sure if a PLB (Personal Locator Beacon) has been mentioned. This is a small box of tricks which you keep on you and activate it if you need help. It has GPS, so it knows where it is and when activated, it sends a distress call with your location and pre-registered details to the emergency services via satellite and they will then come and find you. There are fancier models available with messaging. McMurdo marine + other companies like ACR make these, here is a link http://www.mcmurdomarine.com/personal-locator-beacons. They work on land and sea and typically are used by mountaineers, sea kayakers etc. ACR have a survivors web page (which appears to be down at the moment) which makes interesting reading.... Since the system works on satellite, it should work anywhere and it does not use the mobile phone network, so no probs if you don't have a mobile phone signal. One of these saved the life of a friend of a friend who was diving and became separated from his diving buddy. He was picked up 9 miles from the dive spot after drifting into a tide race. I would be interested to hear what you finally go for.

One thing to watch out for on an older vehicle is the radiator. If you plan to put the intercooler in front of the radiator, the intercooler will heat up the air going into the radiator. I added an intercooler and then had to put in a new radiator since the old radiator was clogged up and couldn't cool the engine down enough when heavy towing. The fuel pump was adjusted as part of the installation (more fuel). The biggest difference was a significant boost in low down torque and it made towing a lot easier. It didn't appear to use any more fuel when driving sensibly. This was on a 300TDI engine with approx 100K miles on the clock.

Another big thumps up for Steve (spud). My trusty 046 would no longer idle even with various carb tweaks and so I went over with it to to Steve's workshop to get it fixed. The oil seal had gone on the clutch side and so was replaced and the carb had some kind of internal blockage which would not clear even with loads of carb cleaner + multiple ultrasonic cleans. Steve managed to source a 2nd hand OEM carb which resulted in a cost effective repair. The saw was thoroughly tested i.e. vacuum/pressure/compression/bearings/oil seals etc and so it should last another 10 years of intermittent use. 2 tanks of fuel through it since the repair. The saw was posted back with very good packaging. So thanks again Steve for a great job.

Oops, sorry to have spoiled the fun so quickly but bikewoo was very close behind, an interesting thread

Light aeroplane mover ?

Great news, I am glad to be able to have helped, the power of Arbtalk

Thanks flatyre, your 62 DL has arrived here so the 67 DL should be with you very soon now if not there already.

Wood grenades are really good with a sledge hammer. Not a good idea to use the back of a normal axe (don't ask me how I know). The smooth conical wedges without the barbs are not very good since they bounce out so go for the wood grenade with barbs, see photo below. I used this combination a lot to start with. If a few bashes of this doesn't work, then put to one side for the chainsaw.

You should be up and running soon, the consensus now is that you need a 67 drive link chain and it should be with you soon, let us know how you get on....

The attached chart shows that a Stihl 028 running a 16 inch Ozaki Pro Steel bar needs a chain with 67 drive links. I have just posted one to you. Once it arrives, can you post me your 62 drive back thanks and let me know how you get on. The website for the chart is here. http://www.flextrading.dk/userfiles/File/reservedelskatalog/1%202011%20katalog/Ozaki%20chains%20&%20guide%20bars%20dk.pdf

Can you ask the seller of your new bar how many drive links the chain should be ? and as NFG said, the required drive links may be stamped on the bar.

Hello flatyre, if you have problems returning your 62 drive link chain, then I will do you a swap.I am making some chains up tomorrow for my saws and I can make you up a 67 drive link chain from 0.325" pitch. 0.063" gauge Stihl full chisel chain, PM me your address if interested and I will post you one out. The 62 drive link chain will fit things like an 028 with a 15 inch bar so you may have friends locally who could use it on other saws or perhaps yourself if you have a 15 inch bar for your 028. If you take a look at the following website, then you can see what Stihl saw/bar combinations use 62 drive links: http://www.frjonesandson.co.uk/2011/04/stihl-chain-guide/ and a Husky list is here: http://www.frjonesandson.co.uk/2011/04/husqvarna-chain-guide/

I have just counted the drive links on a chain off an MS250 with a 16 inch stihl bar and as TGB says, it is 62 drive links (0.325" pitch). The drive links on a 16 inch bar for an 026 is 67 drive links. The bar mount for an MS250 with the "no tool chainsaw adjuster" is quite different to that of eg an 026 with a screw adjuster and I guess this is what makes the difference. In what way does the chain not fit ? Too short ? Doesn't match the nose sprocket (e.g. different pitch) ? What model of saw is it and what type of chainsaw tensioner does it have ? A picture would help.

Hi Stoatally, they are ready, see pictures. I will drop these off at your home tomorrow night and you can choose whatever is best for you. The wood is ash, approx 15 inches in diameter. I do have bigger diameter ash, but it is oval, if 15 inches isn't big enough and oval is ok, then I will slice a couple of those for you as well. Have these as a present and all of the best for your big day

Sorry inbox freed up

Fiskars L77, the best loppers I have ever had