Stubby
-
Posts
31,286 -
Joined
-
Last visited
-
Days Won
115
Content Type
Profiles
Forums
Classifieds
Tip Site Directory
Blogs
Articles
News
Arborist Reviews
Arbtalk Knot Guide
Gallery
Store
Calendar
Freelancers directory
Everything posted by Stubby
-
I don't think the TPO was " contravened " . It was lifted to allow the 5 day notice .
-
This is pretty desperate for a thread !
-
Plus or minus is irreverent I think . Its direction . If something is , for example , minus 28 degrees and becomes minus 8 degrees its warmed up . If something is minus 28 degrees and become minus 38 dgrees its cooled down .
-
It warms up then ?
-
2nd that .
-
RIP Odin the Logging Clydesdale.
Stubby replied to TRADITIONAL LOGGERS's topic in Forestry and Woodland management
When you work with an animal for a long time it makes a special bond I feel ./ More than just a pet . Really sorry mate . -
If a cold temp " cools down " doesn't it get even colder ?
-
Hee is mine .....
-
You know I trust you Steve
-
I thought that if the chain was not getting lubed it went slack too quickly as all the joints become loose due to premature wear ? Maybe you have a " tight spot " on the chain ?
-
Had the chainsaw (bar first ) between the legs picture 3-4 times a year for the last 2 years
-
Land and water did some work near us this time last year , Flood prevention really clearing ditches , culverts and cleaning the river bed ( in full flow ) to get every thing flowing away quicker . Seemed to work ......
-
First is 372 and second is 390 . Both spud ported . Mufflers came from a bloke in he U.S.A.
-
Same handy work me thinks !
-
Husqvarna Non Xtorque 372XP .
-
Stops you nodding off up there !
-
Hi Steve . Stuart has contacted me about the cheese board so you can cross that one off bud . Regards Andy .
-
I new what you meant Ted . just being cantankerous ! Sorry bud
-
Would be my opinion as well spookily !
-
You seem to have developed a bit of a stutter Ted me old mate !
-
Yep standard pto shaft speed I know . Point I was making was the actual cone does not need to be rotating fast as long as there is plenty of torque .I understand about glazing the bores on the tractor so I suppose its a compromise ( as life often is ) with the revs . altering the revs up and down and using non synthetic oil until the rings have bedded in is the ideal but ho hum and that !
-
Thanks to Rob also from me . 36" bar came today . Swapped the tip over to .404 with the rivets supplied and we are off and running ! Almost the whole fleet done now !
-
What about a Hycrack cone splitter . No hydraulics to worry about . Some people are frightened of them but I recon they are the billie bollox ! See the other thread " screw type splitters "
-
I was told ice not heat for muscle in spasm .....
-
Good advice . I thought 540 was low rpm .
