Jump to content

steve collins

  • Content Count

  • Joined

  • Last visited

Everything posted by steve collins

  1. it was up for £7500 few years back, dont know if it sold for even that. All i can tell is its had some paint
  2. think you can still get them on german ebay and amazon although i heard were being discontinued
  3. Ive used both, 461 runs a longer bar better but does have the extra CCs also will be better built than the 462 but heavier. Stihl did go all out on the weight saving in the 462 to make it a lighter saw but with that comes problems, the top cover is single piece and will break from a light strike also the rear handle/trigger area is fixed by a prong mechanism and has come apart in my hands lots which has lead to wear in the throttle assembly as its a series of rods and pivots rather than a cable. 462 is a really good saw, Ive cut hardwood and softwood with for a year now and you just have to be a bit carefull with it whereas the 461 was a solid unit
  4. I doubt you will find any fencing grade oak in kent/ sussex area as sandwich are hoovering it up at moment as the price is strong. If you do be prepared for a high price!
  5. So that would ideally be the whole lot going then! I spoke with them today and they said it was more a discussion with input from different contractors experiences dealing with harvesting of dead ash/chalara and butt rot trees
  6. There is a euroforest meeting/discussion next month regarding dealing with ash dieback trees should be interesting!! I would commission a tree safety survey, then take out all the trees within striking distance of the footpath if that is possible?? seems crazy that you have to have a licence for alive trees with signs of chalara, what did they say about half dead?? im guessing some will have but rot too? so i would go round with a hammer tapping trees whilst wearing a hard hat and marking the hollow ones then taking them out. we had perfectly health trees on one job but lots were hollow so were taken out, public safety would be my main concern!
  7. I have a 462 and its coming up to a year in June in the woods, i was asked recently by a dealer if i wanted a 500i? my response was for them to tally up how much the 462 has cost me in spares. I have had 2 chain brake handles, 3 shroud covers, rear handle cover and recently bent the front handle!! If you want a 70+cc saw that will last and is not made from cheap plastic and a front handle made from tin foil( it is ridiculously light/ thin) then try any other brand!!
  8. I read somewhere few years back on their own website they pay £150( not sure if vat was included on top) for a experienced hand cutter, so up to medium tree and first aid, Problem is they moan like hell if you charge this even though the website states the above!!!
  9. if it plays up again try the wiring harness from the coil to the carb
  10. the crane has always been the limiting factor, ive seen many a purpose built skidder haul wood out they just get the cable on, winch it tight then lift the butt plate and drive out which keeps one end out of the mess the same with a grapple skidder. The plus side being there is a winch on site to manipulate trees and pull yourself out the mess when the weather turns, cheers for the input
  11. so your saying a hsm 805 wouldnt have the guts to pull 150 + cube timber? however i look at it its always a 2 machine operation but many wanting the timber carried out these days rather than skidding due to the mess made
  12. thanks for the response, yes basically using crane to lift butt end on to toothed butt plate and a winch cable wrapped round for safe measure then drive out, yes i mean shortwood Ive seen a cat 525 grapple skid out timber but then a forwarder go in to collect the shortwood Ive looked at the specs on the crane types and not sure if some are up to task, just seeing if there is one piece of kit to do the job really
  13. looking for opinions on machinery to extract 150 plus cube hardwoods? are the crane type skidders like hsm, noe, wf trac and kotschenruther up to task ?? reason being you can haul out the tops after with a trailer attached or is it excavator and forwarder ? any thoughts welcome
  14. id say its the fuel solinoid playing up from talking to others with same symptoms, not sure of cost to replace though
  15. no i didnt, but the helmet did the trick just a massive bruise on chest/shoulder as it glanced off The protos does have better adjustability than others and also replaceable top if you take a hit
  16. Just got a protos, have used the husky helmets for years then got twatted by some blow back felling and thought i need to invest in my head as much as i do my feet and legs for protection. Good Boots and trousers are £150 + each so why save on protecting your brain as that's the most important part, just my thoughts
  17. I believe there are problems already with the 500i, i keep hearing about the oil cap protector breaking of when snedding, not seen any pictures though!!
  18. was it darren you were speaking to?? saws are going same way as cars, just glad i got hold of some new 3 series husqvarnas as i have a big box of spares so should keep me going till i cant cut no more
  19. not in the same league!! might have something to do with the extra CCs but if it has some "work" i think it could be close
  20. both are great, one is better made but heavier the other lighter but with fast throttle response but not so good on a 24" bar
  21. Okay, so i got to use a 572 the other day in some scabby horrible beech and oak around 20" which was the ideal test material for me!! it wasnt quite broken in yet but you could feel the power was always there when you needed it compared to the 462 which has a slight lull when introduced to some wood at full revs but carries on through- its kind of hard to explain!! Its well built and the rear handle didn't come apart in my hands!! air filtration is miles better than the stihl, ive owned a 462 for 9 months now and you can notice the weight difference. Overall i think its a more all round saw compared to the 462 which has super fast pickup which is good for snedding but is more suited for softwood.
  22. okay, cutters must have a professional refresher in the last 3 years and also a first aid +f, this is mandatory on all fc sites i guess they have this also multiple windblow. Radio comms essential as im guessing its a remote location you need to think of basic scenarios with one tree or multiple trees like: one blown tree in one direction, windsnapped trees, hung up/part blown trees, trees under sever tension and the dreaded lots of trees all over in a mess. this is all advice i can give as this is all i have encountered
  23. cheers dave, how do you find the air filtration? do you get many fines through in the carb elbow?
  24. Do you think the 572 out cuts your ported 372xpw/375? just asking as i own one too. Yes i saw the re vamped 550 with the hi top type air filter never had any problems with them, i think the new husqvarna 59??? will be out before a re vamped 562 imho


Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.