Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by C.J

  1. C.J

    chainsaws and trousers

    Which sprocket and chain do you have on your saw ? 3/8" pitch , 7 tooth sprocket = 21.4 m/s @ 9600 rpm 0.325" pitch,7 tooth sprocket = 18.5 m/s @ 9600 rpm
  2. C.J

    357 idle problem

    Did you use a new gasket between the cylinder and crankcase ?
  3. C.J

    Oregon Chains on a stihl bar

    Stihl chain has channels to get the oil to the rivets it is therefore more efficient and uses less chain oil. If you are replacing an oregon chain on a stihl saw you will have to increase the oil pump flow rate to allow for this. I use stihl RSC chains on Husqvarna and Oregon bars.They are available in 0.058" guage in both 3/8" and 0.325" from KWIK CHIP on ebay.
  4. C.J

    Flaming Ace - you seen this???!

    Its a 116 still on original 18" bar and chain. Just put a new piston in - going to try it with an 8 tooth and some RSC
  5. C.J

    Flaming Ace - you seen this???!

    Looks a similar vintage to my "WILDCAT":biggrin:
  6. C.J

    L200 Transmission Shudder...

    Are the yokes at either end of your prop shaft correctly phased ? The yokes should be aligned at 90 degrees.It shouldn't make alot of difference on a long propshaft but you've said that it is better when loaded .The prop will be straighter when loaded and if you have uprated springs the problem will be worse.Some props can only be aligned in one position and cannot be changed.
  7. C.J

    Hyd oil service - entec

    Do not use brake and clutch fluid
  8. C.J

    Quick hitch for compact tractor

    Twose You may have to adjust the lower link arm width between implements and you'll definetly have to take the toplink on and off - so I don't think you will gain very much with the northern tool option. With the A frame you just back up to the implement , lift and it locks on automatically. To take off you just pull on the rope , lower and its off
  9. C.J

    Tree Id Please

    Nice pair of tits
  10. C.J

    Quick hitch for compact tractor

    Cheapest option is to weld them on especially if you make them yourself out of some scrap channel.Tractor A frame costs about £140 and weld on implement A frame about £40.You could weld some clevis plates on the "weld on frame" if you don't want to alter your imlement. When I'm on logs I drop the splitter off turn the tractor around and throw split logs into 8 foot loader bucket.I have made up some 20 foot extension hydraulic hoses and the tractor has cat 3 hooks - A frame would be alot quicker picking up and dropping off.
  11. C.J

    Quick hitch for compact tractor

    Twose A frame quick hitch - Any Ag machinery dealer will suply you one.


Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us


Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.