Jump to content

Log in or register to remove this advert

Recommendation - Flail for a AGT 835.


richy_B
 Share

Recommended Posts

Hello all,

looking for a flail mower to go on an AGT 835. I'd like to keep it roughly the width of the machine for access reasons so around 1.3-1.4metres. I'll be cutting rough grass with some woody weeds/bramble mainly. Budget of £2k inc VAT. Obviously keeping the alpines working on slopes ability as much as possible.

 

Any recommedations?

Link to comment
Share on other sites

Log in or register to remove this advert

I have one of these;

Bargam S.p.A. - Sprayer Machine - polverizzatori - nebulizzatori - atomizzatori - sprayers - pulverisateurs - feldspritze - atomiseur - mist blower - atomizer - atomizadores - pulverizadores - sprgerte - automoteur

Takes 2" material with ease, and 3" with a couple of passes...

Not sure you'll get it for your budget though. maybe one of the lighter ones...

 

You can buy it from here Home | Cleveland Crop Sprayers Ltd

Link to comment
Share on other sites

I think the one I had will be about 3K, its certainly well built, the 835 should lift it no problem, HP wise you should be ok, mine is 48hp but you could just go slower if the going gets heavy. Please note the one i have is meant to be driven backwards on a reverse drive tractor. IE the PTO goes the right way but you turn the seat round on the tractor. if you don't have reverse drive you'd be better with a different model. they have other lighter ones that will do grass and probably cost less, and also a heavier one that will take up to 6", but needs more HP...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.