Jump to content

Log in or register to remove this advert

defenders....check your tyre size (-:


Recommended Posts

Ive been running on 225/75R16 for about 4 years which was the size fitted to mine when I bought it.

 

The last set of tyres I fitted before these were 225/85R16.

 

The difference between the two is the wall height, in other words one tyre is much taller than the other, by roughly 3".

 

So I did some calculations for the 20k miles that I have done on the 225/75R16's which have a smaller circumference than the 85's.

 

Circumference

75 = 2.23m

85 = 2.48m

 

Revolutions per mile

75 = 721

85 = 648

 

difference per mile = 73 revs

 

If I have my calculations right, that means that over the 20k mile i have done on the smaller tyres, they have cost me 93.75 gallon of fuel more.

 

I also would have travelled a further 2250 mile

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

The change in the gearing would have an effect on the reaction to the throttle position. A faster running engine under a lower load uses less fuel than a slower one under a higher load. The tyre difference is unlikely to have made as much of a difference as you think.

 

Also the 10% difference in side wall height would not equal 3".

 

A 225 / 75 has a side wall of 168.75mm

The 225 / 85 has a side wall of 191.25mm

 

Thats just 22.5mm per side wall.

 

Thats 45mm or less than 2" total height difference.

Edited by Justme
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.