Jump to content

Log in or register to remove this advert

Post your stump grinding photos


Stefan Palokangas
 Share

Recommended Posts

  • 1 month later...

Log in or register to remove this advert

  • 5 weeks later...

Had a strange issue with the machine. Would not start. Tried everything, Even the screwdriver on the starter motor. Nothing. Found the earth on the plate the engine sits on had bad connection to the engine due to loose bolts . So engine bolts have been loose created muck between it and the engine. I created a cable between the earth and the bolt holding the starter engine. And tighten the engine bolts holding it to the plate. Won’t lift it and clean. This fix sorted it. A thought to anyone in similar situation. IMG_1314.thumb.jpg.5359e7b66bfd22392f65c2b3c0369693.jpg

 

  • Like 2
Link to comment
Share on other sites

  • 1 month later...
2 minutes ago, Scottish Cleaning Service said:

Is there any reason to leave tree stumps 12" high? I would have thought before I grind the stump it would be easier to cut it flush before one begins. 🤔

Can only think no-one wanted to put their chain through all the epi growth at base, especially when grinder is pto driven

Link to comment
Share on other sites

There are reasons for leaving stumps high, if digging out for example. Without good reason it's better to cut low I believe.

 

A while back I was swearing at the felling course that had been held in the wood where I was working, tore a hydraulic hose out of the tractor on a needlessly high stump... (for long standing members here, I'm not the reincarnation of TCD but agree with his opinion on high stumps!)

  • Like 2
Link to comment
Share on other sites

These are two left high by a lazy git of a tree surgeon. I asked client did she want them left so high,  didn't get a say in it. No reason to not cut right down, I did it with my Echo with a 20 inch bar. Then ground them right out. No crap in there to warrant leaving them like that. Its easier to cut them high if you don't like bending, lazy twat.

USER_SCOPED_TEMP_DATA_orca_share_media1608819471753_6747877945653561457.jpeg

received_154366656445934.jpeg

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.