Jump to content

Log in or register to remove this advert

Prusik zigzag mk2


valentino petrescu
 Share

Recommended Posts

  • 2 months later...

Log in or register to remove this advert

Just thought I'd post some pics of my cracked zigzag here, since I couldn't find anywhere else that had recent pictures posted. This is a MKII zigzag purchased new last summer. It has seen relatively little use as most of my time since then has been spent working from an aerial lift.

zigzag%2Bfailure%2B-%2B2

You can see the crack in the third rivet up from the bottom

zigzag%2Bfailure%2B-%2B3

and the throat where the rope feeds in so you can see how limited the use this particular zigzag has seen.zigzag%2Bfailure%2B-%2B1

 

Some background on the failure. I am a larger climber weighing 300lbs as such I know I can put higher loads onto my gear than the average climber. That being said I am always diligent about minimizing the loading my gear, and this zigzag has never seen any falls or heavy shock loads or anything of that sort. It has never been side loaded across a branch either. I regularly inspect my gear, paying special attention to the zigzag links (based on having seen the petzl inspection notice). This crack appeared after a relatively leisurely climb/trim of a blue spruce (prior trees were also relatively mild, crab apples, small maples and such).

 

It is currently being sent back to petzl for replacement/repair under warranty, hopefully with the new MKIII.

 

NOTE: This does not change my impressions of the zigzag, it is a fabulous piece of gear and I miss climbing with it already. That being said my impressions of petzl's development/testing arm... well let's just say I'm not terribly happy to be finding failures on stuff that shouldn't be failing in the first place.

Link to comment
Share on other sites

  • 3 years later...
16 minutes ago, Mark Bolam said:

Petzl will swap it for a mk3 FOC as Steve said.

The new ones look the size of a small piano Darrin!

No doubt its been heavily overly engineered on account theres gonna be some complete half wits who'll attempt to use it without the other bit that goes with it..

Link to comment
Share on other sites

1 minute ago, Vespasian said:

No doubt its been heavily overly engineered on account theres gonna be some complete half wits who'll attempt to use it without the other bit that goes with it..

Let us know how you get on then ...

  • Like 2
  • Haha 5
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.