Jump to content

Log in or register to remove this advert

Heizohack HM 6-300


John Shutler
 Share

Recommended Posts

Log in or register to remove this advert

  • Replies 21
  • Created
  • Last Reply

Top Posters In This Topic

thinking about getting a Heizohack HM 6-300 to go behind my valmet 8050

I think the minimum required hp is around 120, my valmet must be around 110 maximimum, also how heavy are these machines

how much better performance would I see over my tp250

thanks

john

 

The Hatz engined ones have 70HP so why would a PTO one need more?

 

Anyway the throat is much bigger than a TP and best of all if you feed a rail clip through it it only breaks a few cheap blades!

Link to comment
Share on other sites

The crane will use a few of those horses too. Not saying it won't run the chipper, but the serious biomass chipping rigs are all running 200-300 hp.

 

 

Careful John. Dave and I were chatting to Alex price about this at the apf the top roller frame on the 300's is a bit thin and so can't be fitted with pressure assist. Heizohack only use the weight of the roller to bite the brash. I'd say pressure assistance is a must if you want to chip brash.

 

Re horsepower you are fine. Heizo have a really low requirement, I know of a 300 that might be for sale. Give me a ring sometime.

Link to comment
Share on other sites

As above, you will need ACP pressure assit for brash ideally.

If you want to crane feed and keep on linkage then the only option is the 5-400, but the 8050 is a bit under powered for it.

The 6-300 is fine for hand feeding, with your horsepower and ok on the linkage, and tbh will cope with brash that's going in by hand.

I ran 5-400 on 8950 with roof mounted kesla, brilliant set up if you need to be linkage mounted, beyond that it's axles and bigger infeed.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.