MTD workshop manual.

[eggsarascal]

Does anyone know where I can get a workshop manual for a MTD 404 ride on mower?

 

I've had a look on line and can't seem to find one.

[Goaty]

A parts diagram any good? I think my brothers is a 404.

[mdt]

Will have a look in a pile of manuals I have and let u know.

 

Sent from my GT-N8010 using Arbtalk mobile app

[GardenKit]

You may find an operators manual easily, but will struggle with a workshop manual. Most repairers will not have one as the machines are so basic to work on and we just muddle through.

 

Is there anything in particular you need to know, Eggs?

[eggsarascal]

A parts diagram any good? I think my brothers is a 404.

 

That would be great. Thanks.

[eggsarascal]

Will have a look in a pile of manuals I have and let u know.

 

Sent from my GT-N8010 using Arbtalk mobile app

 

If you could have a look it would be much appreciated.

[eggsarascal]

You may find an operators manual easily, but will struggle with a workshop manual. Most repairers will not have one as the machines are so basic to work on and we just muddle through.

 

Is there anything in particular you need to know, Eggs?

 

I'm going to change the belts on the mower, when I propped it up to have a look at the belts I noticed one of the springs that tensions one of the pulleys as come adrift and I can't for the life of me see where it is supposed to clip on to. I'll take a picture later and post it on here.

[Goaty]

Sorry its not a 404 model.

[eggsarascal]

See the spring held by the pliers, it looks like it's Been hooked to the hole in the upper cover just to the right of the tip of the pliers.

 

[eggsarascal]

It holds this pulley tight -normally I think. By moving it to the left and tightening the belt.