Jump to content

Log in or register to remove this advert

More Brain picking


NickinMids
 Share

Recommended Posts

How much should I charge to take down and remove this Cedar.

Sixty foot tall...1 metre base diameter and fair old drag through utility room and garage to get it to a chipper and vehicle. Any opinions about how many loads of chip/logs. P.S. Is Cedar wood worth anything

597669397170e_CedartoGo.jpg.0e038460728eea546dc2ce196fc08d28.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Lots, it sounds a right pain of a job. No other way to get it into a neighbours property in exchange for some free cedar firewood and an easier drag.

 

sent while pretending to do something important on my mobile.

Link to comment
Share on other sites

Can you get them to keep the chip and hire in a cs100 then you've saved a good bit of time dragging brash

 

 

Sent using Arbtalk Mobile App

 

 

But would the chipper fit through? I tried to get mine through a garage/utility/office that had a few corners and no joy. The length of the chipper doesn't do it much favours for squeezing through houses.

 

 

Looks like the tree would drop in one? There's a bit less work.

Link to comment
Share on other sites

I use a jo beau m300 for back garden jobs like this. only 700mm wide so gets through most doors, and can fold or remove the feed chute to reduce the length. Handles anything upto 75mm diameter easily. great machine and can throw the chips upto 5m on a good day! Looks like you could loose the chip on site under the bushes as mulch. That just leaves you the logs to carry out on a sac trolley. Any reason why you can't clear fell to where you took the photo from? Looks like it should go from what i can make out on the pic.

Link to comment
Share on other sites

I use a jo beau m300 for back garden jobs like this. only 700mm wide so gets through most doors, and can fold or remove the feed chute to reduce the length. Handles anything upto 75mm diameter easily. great machine and can throw the chips upto 5m on a good day! Looks like you could loose the chip on site under the bushes as mulch. That just leaves you the logs to carry out on a sac trolley. Any reason why you can't clear fell to where you took the photo from? Looks like it should go from what i can make out on the pic.

 

Whats a Jo Beau....thought that was summat that knocked on the door when you were avin tea

Link to comment
Share on other sites

Around £1000 if drag out is as bad as it sounds. 1 load of chip 2 loads of logs.

 

 

WM Tree Services

 

http://www.bestkenttreesurgeons.co.uk

 

It's the heavy you need to watch out for. 1m dia?

I'll see Billy's £1k and raise you £150.

They'll be a lot of dust to rake if you're handballing it out.

 

 

Sent from my iPhone using Arbtalk

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.