Jump to content

Log in or register to remove this advert

Macrocarpa milling - timber properties and uses


Liam88
 Share

Recommended Posts

1 hour ago, trigger_andy said:

Do you have the quick release handles for the legs? Makes adjusting much quicker. You're done within 90 seconds. 

I have the old system, and I am not prepared at this stage to shell out for the cost of the new brackets and quick release unit.

If they where backwards compatible it may be an option, but they don't look to be or read that way on the description.

Link to comment
Share on other sites

Log in or register to remove this advert

18 hours ago, Big Beech said:

I have the old system, and I am not prepared at this stage to shell out for the cost of the new brackets and quick release unit.

If they where backwards compatible it may be an option, but they don't look to be or read that way on the description.

The kit I got off of Chainsawbars was cheap, basic and backwards compatible. It works with the existing brackets. 

Link to comment
Share on other sites

32 minutes ago, trigger_andy said:

The kit I got off of Chainsawbars was cheap, basic and backwards compatible. It works with the existing brackets. 

The listing read that it was only for the new end bracket design and was in that statement not backwards compatible ?.

So therefore I bought a whole new spares pack.

Screenshot_20200913-114648_Chrome.jpg

Edited by Big Beech
Link to comment
Share on other sites

9 minutes ago, Big Beech said:

The listing read that it was only for the new end bracket design and was in that statement not backwards compatible ?.

So therefore I bought a whole new spares pack.

Screenshot_20200913-114648_Chrome.jpg

Thats the one I bought. Needed a few extra spacers and Rob sent them out for free. :)

 

I have/had a Chinese Ecomill but one of the Legs is a genuine Granberg. Fits fine and works great. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.