Jump to content

Log in or register to remove this advert

Mitsubshi Canter Diesel problem?


bolla
 Share

Recommended Posts

Thanks for replys

I thought the truck had sorted itself out but has started going into safe mode alot about 4 times in the last 20 miles.

I have had a look for anything obvious like bad connections on electrics did not find anything,

Cant see any breather from the fuel tank would it be in the cap?

A friend plugged in a diagonstic and he seems to think the reading on the fuel injectors was wrong they were reading 1 and 2% on tick over he seemed to think they should be on 0 or minus when the truck is ticking over.

He managed to switch of the amber light but I think it will come back on next time the truck goes into safe mode.

I think the truck will have to go to the diesel mechanic for a through check.

I got a price from Mitsubshi for injectors £313 + vat each so am hoping its something else.

Is it likely a decent diesel mechanic would be able to find the problem or is there alot of change this pay the bill and go back a week later with the same problem only to change another expensive part.

 

The fuel gauge is reading a bit less then half a tank, its only gone into safe mode on half a tank or less is this just coincidence ?

Is it likely that injectors would need replacing on a truck thats only done 33000 miles (they are mainly intown miles alot of stop start)

Thanks

 

I doubt the fuel level is relevant but I know if the fuel level gets very low on our disco 4 it goes onto reduced performance. Could it be there is a faulty low fuel level sensor in the fuel tank.

Link to comment
Share on other sites

  • 7 years later...

Log in or register to remove this advert

  • Replies 23
  • Created
  • Last Reply

Top Posters In This Topic

  • 7 months later...

hi, having the same problem with my 2002 canter 3.0, once plugged in reading low fuel pressure, changed diesel filter checked for leaks etc, being told by 2 mechanics it's possibly fuel pressure sensor or diesel pump failing, finding it very hard to get somebody to work on it to actually identifiy the actual problem. any additional info much appericiated

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.