Jump to content

Log in or register to remove this advert

Spuds Porting and Tuning Thread


spudulike
 Share

Recommended Posts

Log in or register to remove this advert

Steve, Bit like my exhaust mod!:001_rolleyes:

 

HI STEVE did the STIHL timber boys run a 661 when they 1st come out as there was big show germany was the you telling me about what bar size on it thanks jon :thumbup:

 

Hey Mendip, Yep we ran 661s in Germany, They did go quite well, Lot lighter weight wise. Not really had much more of a go on one then that though, i"m sure Stihl will have it sorted soon :)

Link to comment
Share on other sites

Have to wait and see - the chap is local so am sure will be up for a boys day out with a few favourite saws:thumbup:

 

Hi Steve, Great first impressions mate! Had a little run with her today she sings! and torque is way way better. Only some big willow today so not a real test but you can feel that the saw just wants to eat the wood!! Cheers Bud :)

 

I'll try to have some vids up soon guys, comparing my stock 660 with the Spudded 660, they are running differant sprockets at the moment so once they are both on the same size we'll have a good comparision.

 

Yep we'll have a day out with some saws sometime. I'll try and get some of the guys with hotsaws to show up ;)

Link to comment
Share on other sites

Hi Steve, Great first impressions mate! Had a little run with her today she sings! and torque is way way better. Only some big willow today so not a real test but you can feel that the saw just wants to eat the wood!! Cheers Bud :)

 

I'll try to have some vids up soon guys, comparing my stock 660 with the Spudded 660, they are running differant sprockets at the moment so once they are both on the same size we'll have a good comparision.

 

Yep we'll have a day out with some saws sometime. I'll try and get some of the guys with hotsaws to show up ;)

 

 

Thanks Chris, be good to see the vids, glad the first impression is good:thumbup:

Link to comment
Share on other sites

Hi Steve, Great first impressions mate! Had a little run with her today she sings! and torque is way way better. Only some big willow today so not a real test but you can feel that the saw just wants to eat the wood!! Cheers Bud :)

 

I'll try to have some vids up soon guys, comparing my stock 660 with the Spudded 660, they are running differant sprockets at the moment so once they are both on the same size we'll have a good comparision.

 

Yep we'll have a day out with some saws sometime. I'll try and get some of the guys with hotsaws to show up ;)

 

HI CHRIS will a ported 660 be faster then a 661 on a 25" thanks jon :thumbup:

Link to comment
Share on other sites

Hi Steve, Great first impressions mate! Had a little run with her today she sings! and torque is way way better. Only some big willow today so not a real test but you can feel that the saw just wants to eat the wood!! Cheers Bud :)

 

I'll try to have some vids up soon guys, comparing my stock 660 with the Spudded 660, they are running differant sprockets at the moment so once they are both on the same size we'll have a good comparision.

 

Yep we'll have a day out with some saws sometime. I'll try and get some of the guys with hotsaws to show up ;)

 

HI CHRIS will you sale this saw then mate im on the look out for a good 660 sound like yours is a good thanks jon

Link to comment
Share on other sites

HI CHRIS will you sale this saw then mate im on the look out for a good 660 sound like yours is a good thanks jon

 

Hey Jon,

 

Ha Ha 10 out of 10 for effort but no saw is not for sale. :)

 

I would say a ported 660 is gonna be better, performance wise then a 661 due to the 661 being restricted for emmissions, Noise, Etc, But saying that, the stock 661 is going to be a good on fuel, emmisions, vibration, and it will still pull a big bar. we used a 18" on stock 661s for the world championships and they run great.

 

Not sure how many mods you will be able to do to a 661 due to the M-tronic, Spud may know more ?

 

Dont want to derail spuds thread to much but i'll try to get some vids of a stock 660 vs ported 660 and once the 661 shows up, we can race that! :)

 

Hope that helps a bit

Link to comment
Share on other sites

Hey Jon,

 

Ha Ha 10 out of 10 for effort but no saw is not for sale. :)

 

I would say a ported 660 is gonna be better, performance wise then a 661 due to the 661 being restricted for emmissions, Noise, Etc, But saying that, the stock 661 is going to be a good on fuel, emmisions, vibration, and it will still pull a big bar. we used a 18" on stock 661s for the world championships and they run great.

 

Not sure how many mods you will be able to do to a 661 due to the M-tronic, Spud may know more ?

 

Dont want to derail spuds thread to much but i'll try to get some vids of a stock 660 vs ported 660 and once the 661 shows up, we can race that! :)

 

Hope that helps a bit

 

That sounds good, I don't get the chance to put much of my work to the test so all input is greatly received.

 

The MS661 will be limited by the strato part of the saw, a mufler mod and slight internal mods may be a decent way forward.

 

For a "money no problem" option, experimenting with turning down piston crowns/squishbands and cylinder bases are a possible option to up the compression but with autotune, you have no control over the fuel system which is always a worry:blushing:

 

Thanks Chris for the input, all much appreciated.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.