Jump to content

Log in or register to remove this advert

Show us your Arb Diggers please.


Stephen Blair

Recommended Posts

Looks a lot more complicated than it needs to be ? At a guess, a pair do the hydraulic disengage when arm up, another pair do the 'don't start when arm down' bit, and the other seems to be an earth for some reason? I'd test the wires still attached to switch with a multimeter- you can see by the diagram that one pair should be open and one should be closed. If it's not doing this then switch is at fault- buy new swith and replace, using heat shrink crimps if yoInsert other media u don't want to be messing around with intermittent connections in the future.

Link to comment
Share on other sites

Log in or register to remove this advert

8 hours ago, Stephen Blair said:

Bingo!

what to do with yellow wire?

D1E9E1D3-5699-437F-AECE-40F0B2B1CC11.jpeg

Hi Steve, I yellow wire is an earth so try earthing it to metal on the machine somewhere!

 

I dont think the switch is your problem if you are hearing the "click". Its most likely the pump drive. Try checking pressure with the machine running, or crack of a hydraulic line from the pump with the machine running. If there is no oil its the pump coupling.

  • Like 1
Link to comment
Share on other sites

On 11/11/2019 at 19:42, LGP Eddie said:

Sorry, I’d like to think I do my bit when it comes to sharing information.

 

This one is different, it’s a straightforward heads up for guys to do their homework if thinking of any of the JCB Midi range as a carrier for a Shear.

I really rate them, but checkout the brochures and you’ll soon find the issue.

A solution is another thing altogether!

 

 

Eddie.

Well I’ve had a look, and for instance, the JCB 67c delivers 90lt @ 190 bar. The Kubota 57 does 76lt @ 206 bar. I must be missing something because I can’t see why the JCB might be considered lacking.

Link to comment
Share on other sites

I need some advise with my little kubota kx36 - 3. 

Last Friday I went to use it and the arm and track functions were virtually dead. The blade and slew are working fine but when you try and use any of the arm functions I just get groaning noises! 

I have changed the hydraulic oil and filters, no change--I wasn't really expecting any as the blade and slew work but seemed a sensible start. 

Anyone know how I bleed the hydraulics on this machine? I did put a new hose on it a few weeks ago but it's done a couple of problem free days work since and I've never had to bleed it before. 

Its bound to be the highly expensive pump??, but any suggestions would be welcome! 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.