Jump to content

Log in or register to remove this advert

Show us your Arb Diggers please.


Stephen Blair

Recommended Posts

I fitted a changeover valve on the dipper of my Yanmar, into the bucket crowd service.

The solenoid pokes out through a convenient hole, so I fabbed a cover and threaded a few holes and bolted it on.

It's activated by a button on the left joystick, providing full proportional control of the circuit via the right joystick.

I use it for the rotator and it's a joy to use.

 

That's a handy diverter. Are the hydraulic lines for the rotator on top of the valve there. Is it a quick release coupling system or do you have to take the spanners out when you remove the grab. Also are the electric circuit type you have better then the manual type. Presumably more convenient from the cab.

Where did that valve come from? Cheers.

Link to comment
Share on other sites

Log in or register to remove this advert

That's a handy diverter. Are the hydraulic lines for the rotator on top of the valve there. Is it a quick release coupling system or do you have to take the spanners out when you remove the grab. Also are the electric circuit type you have better then the manual type. Presumably more convenient from the cab.

Where did that valve come from? Cheers.

 

The valve is a 12V 3/8" Badestnost DVS6-6/2L:

BADESHTNOST Plc. - Hydraulic products, valves, > PRODUCTS

http://hydraulic-vlv.com/files/mf/products/32_file.pdf

 

Yep, the services for the crowd ram pass through the body the valve and the diverted services to the rotator (in my case) are out the top.

 

It almost bolted straight into position, except I had to file the holes in the hose mount bracket on the dipper a tiny bit to let it all line up nicely.

Using suitable connectors, all the original hoses on the machine re-fitted without modification.

 

I also milled a few millimeters off an edge of the valve (opposite end from the solenoid) to allow it fit neatly into position on the dipper.

 

The new auxiliary hoses duck under the end of the crowd ram and appear out the side of the dipper and terminate under the original rock-breaker hose ends.

I got them made up slightly too short, so the bends in them are a little tighter than I'd like, but they appear to be working fine for the last year or so.

 

They all terminate in flat-face quick couplings.

 

The diverter is operated by means of a push button on the left joystick.

Its default position (unenergised) leaves the crowd ram work normally.

Energised (button pushed), the service is switched to the new hoses, giving full proportional control of whatever tool is out there.

 

I can't crowd AND rotate (in my case) simultaneously, but I haven't found that to be an issue.

DSCN3261_web.jpg.5ddfd74936d856e7061eed95db3bb00b.jpg

DSCN4597_web.jpg.1b99d4ec949f0600ee224b1e81c941f2.jpg

DSCN4600_web.jpg.effb14debf96dea972723757cc51d7f5.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.