Jump to content

Log in or register to remove this advert

Beginners climbing guide, hints, tips and general climbing techniques


Adam Bourne
 Share

Recommended Posts

Just get into the habit of pushing the hitch up when you need to stop.

 

A bit like when you push the tail of your rope above your prussic if it is slipping.  

 

OP takes a lot for it to bed in as it is so stiff.  It isn't my favourite though but plenty of climbers like it.  Once you get used to the characteristics of the VT you may, as I did like to run it a bit loose.  It helps the rope tend it self when you are ascending or coming back in from  branch walking.  Again the little push of the VT hitch will just make sure it sets.  Once the cord beds in it will catch if you load it suddenly, where as it is more likely to slip if you load it slowly.  

  • Like 2
Link to comment
Share on other sites

Log in or register to remove this advert

On 04/09/2018 at 21:12, peds said:

Evening all, how do?

 

I'm in the middle of a career change after 17 years in kitchens. Did an intensive course last November and came away with my CS30/31, CS38, and CS39, plus tickets for stump grinder and wood chipper, but since that I've been a full-time dad. I've only ever had two days of practical work experience. Now, in two days time I've got a trial day with a local tree care company. I'll be felling a few trees for him and showing a brief climb, among other things.

 

Quick question... if you had someone as green as me show up on site for a trial, what stupid mistakes could I make that would, at best, make me a laughing stock, or at worst, make you throw me off site straight away?

Cheers for any advice dudes.

 Don't fill the chain oil hole with petrol mix ;) ( like our assessor did on his verification assessment :P ) k

Link to comment
Share on other sites

Just an update on the hitch climber, had another few goes with it and finally got it to start gripping with a distal hitch. Well, thats what i liked best. My cord is 90cm is does seem too long imo. So can I just buy a few different 8mm cord cut and just tie double fishermans in the ends or is this not recommended? Thanks. 

Link to comment
Share on other sites

3 minutes ago, J7G7 said:

Just an update on the hitch climber, had another few goes with it and finally got it to start gripping with a distal hitch. Well, thats what i liked best. My cord is 90cm is does seem too long imo. So can I just buy a few different 8mm cord cut and just tie double fishermans in the ends or is this not recommended? Thanks. 

You can buy hitch cord by the metre and tie it too your own length or buy shorter eye to eye hitch cord

Double fishermans are fine for the terminations.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.