Jump to content

Log in or register to remove this advert

the 'todays job' thread


WoodED

Recommended Posts

After many great engineering minds have looked at my just out of warrantytw230dhb spout end chute, the threads failed months ago, the square holes rounded off up there, and tw recommend buying whole new spout
I noticed my lads have finally cured the flap jumping or dropping every 2 minutes. Modification no 23 hailed as a success with a big thumbs up .

  • Like 1
Link to comment
Share on other sites

Log in or register to remove this advert

8 minutes ago, oldwoodcutter said:

IMG_3825.jpg

You may laugh, but some 150mm grey plastic pipe, with a little bit of jiggery poky can replace the flap, plus you can leave it at 2 ft long or so to improve chip direction.

Edited by Mick Dempsey
  • Like 3
Link to comment
Share on other sites

3 hours ago, Mick Dempsey said:

You may laugh, but some 150mm grey plastic pipe, with a little bit of jiggery poky can replace the flap, plus you can leave it at 2 ft long or so to improve chip direction.

I did exactly that mick many years ago when I had an old pezzalarto Chipper and an old pickup with a canopy on. I fixed a 3ft 4” piece of plastic pipe on the nozzle of the Chipper so it would shoot into the back of the pickup.

  • Like 3
Link to comment
Share on other sites

2 hours ago, TTownsend said:

IMG_2777.thumb.jpg.6c887460c1eda4e48069b949f415e44f.jpgIMG_2783.thumb.jpg.ef04813b12a037fdd2848fe419bba74f.jpg

 

Balancing act today in some very broad and old Yew trees at Montacute National Trust. Pretty happy with the out come, all silky and Secateurs work so made for a nice sunny end to the week.

 

 

 

theirs a long reach hedge cutter in the first photo 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.