Jump to content

Log in or register to remove this advert

100m Blind Redirected Winching


liamjordan
 Share

Recommended Posts

Well following on from my thread yesturday about a http://arbtalk.co.uk/forum/picture-forum/44617-poplar-dismantle.html i have been doing over the weekend, today was very interesting.

 

I was planning on finishing quickly this morning as i just had to cut the stump lower and finish tidying up, but nothing ever that simple is it.

 

As i dropped the stem yesturday (fell about 20ft in one) it landed on all the lumps i had rigged down, this was my plan so i could ring it up, but it knocked two of them down the bank and into the stream, i should have noticed how far they were in yesturday but i didnt, so today came to move them and realised there was about 3ft of the one submerged... :thumbdown: we manged to pull and hand ball the smaller one out but we had to set all this up for the other.

 

Just made this up with bits and bobs i had with me, it worked really well and was a good expirence. I didnt actually winch it beacuse i didnt have the battery cables for the winch with me, so we had to just pull out the winch rope and reverse the landy.

IMG00279-20120604-1410.jpg.cc2b0eec098593564cb1e1e8bd4067af.jpg

IMG00278-20120604-1409.jpg.c6e798716ee56c904065012e3c53e1e1.jpg

IMG00277-20120604-1409.jpg.6ab4a38f4d1e2ab6d2cdc583f0ff0d7b.jpg

IMG00276-20120604-1409.jpg.a76c042d0006f82abb9e55e6218f8731.jpg

IMG00275-20120604-1408.jpg.880394207e8a6d91e5a7ec55026414b8.jpg

IMG00274-20120604-1408.jpg.5597372ccf55196a8b85f61966f1e928.jpg

IMG00273-20120604-1408.jpg.94696be27cf59918970e9781262d7cc9.jpg

IMG00272-20120604-1407.jpg.84367d2ad93039de9b90a500a686709e.jpg

IMG00269-20120604-1326.jpg.df5ba85aa7fc74d3ba608a38c3e02143.jpg

IMG00268-20120604-1325.jpg.c343beaa924dfabe9ada37f86a1feb97.jpg

Edited by liamjordan
Link to comment
Share on other sites

Log in or register to remove this advert

Nice one Liam, sure looks like you sorted it in the end:thumbup:

 

Just a bit of advice(as usual), be careful pulling winch line with the landy, they aren't designed for it. The load you were pulling here wouldn't harm it though I dare say.

 

Just out of curiosity, how did you get the cable back in if you didnt have the remote with you? Did you just do the bumper wrap tidy?:001_rolleyes:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.