Have they all been scraped?

[AdamnRalph]

:confused1:Im looking for an old 360 track machine digger. I want to put a timber grab on it then i can move my stock about. Im getting a bit fed up of hand balling 40 plus tons of firewood a week. Me back is starting to not want to bend in a morning!. There used to be loads of them sat in farmers fields doing nowt and now i want one thay have all been scraped! If any one has got one doing nowt and wants to sell it please let me now. Also has anyone made a timber bench to load a firewood processor easy or hard to make?

[Mr Ed]

I have one, but it might be a bit too nice for what you need it for. Hitachi EX135 UR fitted with GV14 rotator and grapple.

[Topcat]

Ed...any idea where I could get a small grab a rotator to fit a small 360?

[josharb87]

got a good one for our hiab, a kinshofner (spelling)

[Busy Daddy]

I have been looking at getting a 2.5 t 360 to feed the chipper and splitter . Has anyone had any experiences of these ? or what sort of weight they will lift?

[Topcat]

Busy..I have a Bobcat 320. It lifts a dumpy bag of logs and will stack two high.Might as well use it for feeding chipper and moving timber about in the yard so trying to find a small grab and rotator

[woodplans]

http://www.digbits.co.uk/excavator_attachments.htm

 

the above link is for excavator attachements, grapples, rotators etc.

[Mr Ed]

Andrew Holmes machinery in Ruthin, North Wales, does the best range of grabs and rotators for any size machine. best prices too.

Phone 01824 750 487

[Stephen Blair]

:confused1:Im looking for an old 360 track machine digger. I want to put a timber grab on it then i can move my stock about. Im getting a bit fed up of hand balling 40 plus tons of firewood a week. Me back is starting to not want to bend in a morning!. There used to be loads of them sat in farmers fields doing nowt and now i want one thay have all been scraped! If any one has got one doing nowt and wants to sell it please let me now. Also has anyone made a timber bench to load a firewood processor easy or hard to make?

I have a 3 point linkage set up that has a roofmount fmv crane on it, I built it for crane feeding chipper on mog but it was too heavy and clumbersome, if you have a tractor it would be ideal for shifting timber i use it for collecting dumpy bags of wood and timber on the back of the mog, but since i bought valmet it has sat and done nothing, you could also attach your log processor on it as it has all relevant fixings for big chipper. Save the back. But i would stay clear of old 360's. It could be more hassle than its worth unless you are an ag mechanic as well.